Question about 2006 Lexus Gs 300

Open Question

Where the fuse for rear power sunshade on gs300lexus 2006 located

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fuse to open the luggage lid for 2006 Chevrolet Malibu LS


The power block that includes the fuse and power relay for the power trunk lid are located inside the trunk. After you have opened the trunk lid (using a key), look at the left wall to locate the access flap that is cut into the trunk lining. The fuse block is underneath this flap. The 10 amp mini fuse for the power trunk lid is at location #22 and the mini power relay is at location #36. Check the schematic on the fuse block cover for exact locations.

Feb 10, 2015 | 2006 Chevrolet Malibu

2 Answers

Trunk fuse 2006 sts


The fuse is located under the rear seat in the fuse box.Trunk/valet fuse.

Feb 04, 2015 | 2006 Cadillac STS

2 Answers

Rear sunshade on my Avalon limited won't go down


The rear sunshade will not go down on me 07 Toyota Avalon limited.

Dec 29, 2013 | 2006 Toyota Avalon Limited

1 Answer

Fuse panel diagram


In my 2011 avalon, it's fuse 22, a 10amp fuse under the drivers side dashboard
Rich T

Aug 03, 2013 | 2007 Toyota Avalon

1 Answer

Rear sunshade button doesn't work on Chrysler 300


I have same issue, the shade work with the touch screen from radio but the rear button on the back between the heated seat button dont work. please help if you know, i have a 2013 300s v6.
thanks

May 02, 2012 | Chrysler 300C Cars & Trucks

1 Answer

2006 Chevrolet Uplander Accessory power outlet not working, is there a fuse I can change and where is it located


Fuse is #23 in the engine compartment fuse box. Same fuse is for both front and rear outlets. My problem was a bad outlet, not the fuse.

Oct 05, 2010 | 2006 Chevrolet Uplander

1 Answer

Does the 2006 dodge magnum have more than two sets of fuses?


THERE ARE JUST TWO.
Power Distribution Centers/FUSE BOXES
1. Front Power Distribution Center
A power distribution center is located in the engine
compartment. This center contains fuses and relay

2. Rear Power Distribution Center
There is also a power distribution center located in the
rear compartment under the spare tire access panel. This
center contains fuses and relays.
Opening The Access Panel
Rear

Jun 04, 2010 | 2006 Dodge Magnum

1 Answer

I have a 1999 chevy blazer I cannot close the


The sunroof is powered by the same circuit breaker that power's your power window, so if your windows work than the circuit breaker should be good. You needed test the switch to verify if works with; on the factory sunroof system the roof is controled by a sunroof module the module receives a signal from the switch then throws voltage to the sunroof motor. The motor and module are located between the sunroof assembly and windshield underneath the head liner. You would reconnected the switch and test to see if the sunroof motor is getting power when the switch is in use by testing the dark green wire when closing and a light green wire when opening. Test these wires at the sunroof motor with a ohm meter or test light. Also, check this procedure to repair...

GM S-Series Pick-ups and SUV's 1994-1999 Repair Guide Power Sunroof - REMOVAL & INSTALLATION

Glass
  1. Close the sunroof and open the sunshade.
  2. If the piece of glass being removed is to be reinstalled, mark the location of the screws, this will ensure proper alignment during installation.
  3. Unfassten the screw that attach the sunroof glass to the sunroof assembly.
  4. Remove the glass from the vehicle.
To install:
  1. Place the glass into position and install the screws that retain the glass. Do not fully tighten the screws just yet.
  2. Adjust the glass so that the fit between the glass and the opening is equal at all four sides. The rear edge of the glass may be slightly higher than the front edge to reduce the wind noise.
  3. After the glass has been adjusted, tighten the screws to 31 inch lbs. (3.5 Nm).
  4. Check the operation and fit of the glass.

Motor
  1. Disconnect the negative battery cable.
  2. Remove the sunroof opening trim by starting at the **** joint and pulling the trim strip from the sunroof opening.
  3. Remove the headlines as follows:
    1. If equipped, remove the overhead or sunroof console.
    2. If equipped, remove the dome lamp.
    3. Remove the coat hooks and the assist handles.
    4. Remove the sunshade-to-roof screws, while pulling down on the sunshade base, push in on the extended screws, loosen the screw that attaches sunshade to the roof and pull down on the sunshade retainer while pushing in on the extended screw. Remove the retainer.
    5. Remove the windshield garnish moldings using trim removal tool J 38778 or its equivalent. Pull the molding away from the pillar and up to remove it.
    6. On four door models, remove the body lock pillar trim panels.
    7. Remove the roof rear header garnish molding using the trim removal tool. Insert the tool into the front edge of the trim and work along the front of the panel, from one end to the other. Unplug the cargo lamp electrical connection and remove the trim.
    8. On two door models, remove the rear seat upper seat belt anchor bolts.
    9. Remove the upper and lower front seat belt anchor bolts.
    10. Remove the rear seat belt lower anchor nut (two door models only).
    11. Remove the end gate or liftgate opening sill plate.
    12. Remove the jack storage cover (left side).
    13. Remove the upper body side trim panel screw (left side).
    14. Remove the upper body side trim panel and the body side front lower trim panel.
    15. Remove the headliner from the vehicle.
  4. Remove the sunroof console mounting bracket.
  5. Remove the straps that retain the wiring harness.
  6. Tag and unplug any necessary electrical connections.
  7. Unfasten the screws that attach the motor to the sunroof assembly.
  8. Remove the motor from the vehicle. Make sure that you do not move the sunroof mechanism while the motor is not in place.
To install:
  1. Place the motor into position and install the retaining screws. Tighten the screws to 31 inch lbs. (3.5 Nm).
  2. Attach all electrical connections that were unplugged.
  3. Attach the straps that retain the wiring harness.
  4. Install the sunroof console mounting bracket.
New headliners must be pierced to accommodate actual vehicle accessories.
  1. Install the headliner as follows:
    1. Install the body side front lower trim panel and the upper body side trim panel.
    2. Install the upper body side trim panel screw (left side).
    3. Install the jack storage cover (left side).
    4. Install the end gate or liftgate opening sill plate.
    5. Install the rear seat belt lower anchor nut (two door models only). Tighten to 59 ft. lbs. (80 Nm).
    6. Install the upper and lower front seat belt anchor bolts. Tighten the bolts to 52 ft. lbs. (70 Nm).
    7. On two door models, install the rear seat upper seat belt anchor bolts. Tighten the bolts to 52 ft. lbs. (70 Nm).
    8. Install the roof rear header garnish molding. Attach the cargo lamp electrical connection, place the trim in position and engage the molding retainers.
    9. On four door models, install the body lock pillar trim panels.
    10. Install the windshield garnish moldings. Place the molding into position, align the retainer clips with the slots and press into place.
    11. Place the sunshade retainer in position, install the screw and tighten to 10 inch lbs. (1.1 Nm). Position the sunshade, install the screws and tighten to 10 inch lbs. (1.1 Nm).
    12. Install the coat hooks and the assist handles.
    13. If equipped, install the dome lamp.
    14. If equipped, install the overhead or sunroof console.
  2. Install the sunroof opening trim. Start the trim in the center of the front of the sunroof opening and work around the perimeter.

Hope helps (remember rated this) Good luck.

Jun 03, 2010 | 1999 Chevrolet Blazer

1 Answer

May have wrong audio system


The Azera Limited adds those items, plus a larger engine, power-folding mirrors, a power rear sunshade and a 10-speaker Infinity stereo. The Limited Ultimate Package adds a power-adjustable steering column and pedals, driver memory functions, wood steering wheel and door pulls, rain-sensing wipers and a 12-speaker Logic 7 surround-sound system with an in-dash six-CD changer.
http://www.zzounds.com/item--APLLOGPRO

Mar 25, 2010 | 2009 Hyundai Azera

2 Answers

What fuse box and location is the power windows fuse at on a 2006 saturn ion


The fuse box in the 06 ion is under the floor covering on the drivers side seat. Just move the seat all the way to the rear and then starting in the front near the pedals pull up the floor covering which is attached by velcro.
Regards, Joe

Nov 20, 2009 | 2006 Saturn ION

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...