Question about Nissan Cars & Trucks

1 Answer

My 2010 Nissan Altima wont start. All the fuses were checked and the crankshaft sensor was replaced. The alternator and battery are both good.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 3,733 Answers

Check the basics, if it cranks good but won't, gasoline engine, have a helper crank it while you check for spark at the plugs. If spark everywhere, use a gage and check proper fuel pressure. Also check fuel injector pulse. Any applicable trouble codes? To check codes, yourself, at the least, you need an obd2 code reader, that will read manufacturer specific codes as well as p0 codes.

Posted on Dec 04, 2016

Testimonial: "Thank you. The car doesn't spark either."

  • 1 more comment 
  • jack layton
    jack layton Dec 04, 2016

    I need more info, what about fuel pressure and injector pulse? Any applicable trouble codes?
    You appear to have coil on plug ignition, the ignition coil has a transistor circuit. Two voltage circuits and a ground. A larger voltage controlled by a smaller voltage, of course, you need ground. Doubtful all ignition coils would go faulty at the same time.
    You said you replaced crank sensor, I hope you checked crank sensor wiring circuits before replacing. If something wrong with wiring circuits, replacing the sensor won't fix it.

  • chrissy
    chrissy Dec 04, 2016

    There were no codes at all. I parked the car and when I wanted to use it again it never started. I will have the wires checked. Thank you.

  • jack layton
    jack layton Dec 05, 2016

    Hope you get going our way.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does a code PC300 mean on a NIssan Altima 2003 2.5S


p0300 means multiple misfire detected. did the fuel pressure check good? are you getting ignition fire to the plugs from the coils? the crankshaft sensor is in a difficult spot and the connector can be hard to get on sometimes. double check the connector and also make sure the terminals in the sensor didn't get bent while plugging it in.

Jun 02, 2012 | 2003 Nissan Altima

1 Answer

2003 altima 2.5l wont start replace cam sensor and crank sensor sprayed starting fluid into air flapper and still wont start any answers


my car nissan altima is not starting.security lignh key program is good. i sow in plugb coil is not come . please tell what can i do

Jul 17, 2011 | 2003 Nissan Altima

1 Answer

Checked battery and was told cells where bad then replaced battery, then car wont start, then replaced starter - still wont start! any suggestions? its a nissan altima 2005 2.5 liter


I really need more information, does it turn over fine? If you turn the key and get nothing but a click, in some models there is a security system that cuts the power to the starter, in which case you would have to bypass the security system or take the car to a dealership to have it reset. If it turns over fine, check to see if you are getting fire to the plugs. If there is no fire going to the plugs, then you might have a bad ignition module or bad crankshaft sensor. Check to see if you are getting enough fuel pressure. Your timing could have jumped, if you are getting spark, gas, and have good compression, then the only thing left could be the timing. If you could give me more information I can tell you more. I hope this helps

Jun 08, 2011 | 2005 Nissan Altima

1 Answer

I have 2005 Nissan altima that wont start. It cranks but wont start. I checked the battery with a portable load tester, good. No codes or check engine light. Fuel pump pumps fuel, wont even come on with...


Nissans are known to have problems with ignition coils which would not show up on code reader. I would start with that. Pull a plug and hold it to ground to see how strong the spark is while turning engine over. If the plugs are wet when you take them out then you can be sure it is in all probability related to coils.

Nov 24, 2010 | 2005 Nissan Altima

2 Answers

Where crank shaft and camshaft?


There are two cam shaft sensors and one crank sensor Nissian did sell a kit at one time with all the sensors in it one cam sensor is in the left cylinder head a one is in the right cylinder head

May 29, 2009 | 2002 Nissan Altima

1 Answer

1987 nissan pathfinder wont crank or anything


FIRST TRY TO SEE IF THE FUSE AND RELAY ARE FUNCTIONING PROPERLY. IF THEY CHECK OUT THEN CHECK FOR SPARK AT EACH ONE OF THE SPARK PLUGS. IF YOU ARE GETTING SPARK THEN I WOULD REPLACE THE CRANKSHAFT POSITION SENSOR. THIS DEVICE IS RESPONSIBLE FOR OPENING INJECTORS AND SPARK PULSE THROUGH THE COMPUTER. HOPE THIS HELPS. PLEASE LET ME KNOW. BEST OF LUCK

May 04, 2009 | 1987 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...