Question about Cars & Trucks

1 Answer

Position of the cam sensor on 96 5.7 2500 series truck

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 4,323 Answers

The cam sensor shows to be in distributor. Have you done any testing? Any trouble codes? If you have the spider fuel system, that system is noted for problems. Fuel pressure is critical to get it started, 60--66 psi. Fuel poppets are noted for sticking.
Did you check voltage and ground at the fuel injector, voltage is fuse protected, ground is controlled by the computer. If no ground two things I can think of to check, security system and rpm signal.
In the diagram, top wire is voltage for injectors and bottom wire is ground.
position of the cam sensor on 96 5.7 2500 series t - 26384992-osju3jyrnymnvvv3fl51m10w-1-0.jpg

Posted on Dec 04, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

VS series 2 V6. It has spark, but why no injector pulse?

what about a cam shaft position sensor
is there a faulty fuse

Nov 24, 2015 | Holden Cars & Trucks

1 Answer

How do i find the problem with an electrical fault on the daf cf75 series. Truck wont start, it is cranking.

run the fault codes read
non starting can be related to the following components :-
ignition (engine) immobilizer
cam shaft position sensor
crankshaft position sensor
oil pressure sensor

Sep 12, 2015 | DAF Cars & Trucks

1 Answer

I have 96 honda accord ex 4 cylinder vtec engine the engine will no Rev past 3500 rpms

maybe a sensor? cam position or flywheel? assume b series? my cars d series theres a chip in the distributer that fails though u may be onsparkless ign.get a fault code reader

May 23, 2015 | 1996 Honda Accord

1 Answer

When replacing the cam position sensor I see Oil in the cam position sensor port

get an OFFICIAL diagnosis from someone with a much more sophisticated reader. It doesn't have to be the dealer... just a good mech that specializes in GM

Mar 25, 2014 | 2007 Pontiac G6

1 Answer

Cam position sensor location

engine bay
on cam shaft pulley

Mar 09, 2014 | 2004 BMW 3 Series

1 Answer

05 navigator codes po012 intake " A " camshaft position over ******** bank 1 po302 random misfire po302 cyl. 2 misfire po303 cly. 3 misfire po304 cyl. 4 misfire po2195 o2 stuck lean bank 1 sensor 1 po2196...

there is nothing wrong with the timing chain position . Just a series of sensors that have gone outside the set parameters so if you check and change each one you will clear the faults.

Jan 03, 2014 | Lincoln Navigator Cars & Trucks

1 Answer

Long crank rough running

fuel pressure, ignition system,map sensor,throttle position sensor,timing,valves,crank sensor, cam sensor, compression

Aug 02, 2012 | 2001 BMW 3 Series

1 Answer

Need to know what dodge codes P0325, P0344 & P0340 mean

0325 knock sensor
0344 cam position sensor intermittent
0340 cam position sensor failure

I would replace the cam position sensor from the codes you provided. The knock sensor
would most likely be related to the sensor failure.

Jun 28, 2011 | Dodge Neon Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78010 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides