Question about Cars & Trucks

Open Question

I have model #26ef031grg. it will not turn on. has only been used a few times.dont know why it wont turn. I tested the power to the has power to the wire that is connected to relay #1

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 102 Answers

SOURCE: Headlight/turn signal problem

RELAY, NOISE SUPPRESION/is 1323592 its black and mounted under the hood on the shock tower, check page 4 and page 16 under LHB230FT in your book(item 464) ? why are you messing with this relay if you have a light problem ? does left turn signal stay on with key off /with parks only /with head lights /both front and back turns or front only? have you removed both frt and back bulbs together and ck voltage in sockets ?/wrong bulbs? i would need more info

Posted on Sep 02, 2008

  • 142 Answers

SOURCE: my car wont start

check the wiring connections at the starter. They are near the back and rear of the engine.

Posted on Jun 03, 2009

  • 89 Answers

SOURCE: 1993 toyota camray battery tested okay pulled

if the battery is ok sounds like the main replay or fuse is blown

Posted on Feb 03, 2011

  • 4399 Answers

SOURCE: Fuel pump issue with 1993 dodge dakota. New fuel

Thanks for choosing FixYa and welcome. You should have power to more wires then one. If I were you, I would run a wire straight to the pump from the battery to see if the pump will turn on. I know one wire is for the fuel gauge. Then the out and return line, then grounds. This could also be the ECM. You should switch the relay out with another to see if that does help. I am not for sure if that is what you mean when you say the relay fuse.

Posted on Jun 03, 2011

  • 1 Answer

SOURCE: 94 Plymouth sundance coolant fan relay which

cooling fan does not come on at all

Posted on Sep 12, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2005 freelander engine immobilised and wont start there is no eka code for this model. How can i get my car to start again

do you know if the ignition box is any good, some auto part store can test the unit.
check the fuse box, your look for a fuse protection, its a fuse, located where the power comes into the fuse box, it sqaure, S-shape, its to protect the unit from shorting out the cars system, everything is dead in the car.
call the dealer ask if this car has that type of fuse, circuit proection fuse.

Oct 22, 2015 | 2005 Land Rover Freelander

1 Answer

What could be the problem

Pull the pump out and see if just running 12 volts across it gets it to work. If that happens then it is not the pump at all but more likely fuse board or even the body computer.

Feb 14, 2015 | Cars & Trucks

1 Answer

My 2001 ford ranger had a momentary short in the

Learn how to diagnose electrical systems an circuits , It's easy ! Do you know what a wiring diagram is ? How to use one to find testing points in a electrical circuit > How to use a DVOM - digital volt ohm meter or a test light > Do you know what voltage drop in a electrical circuit is ? How to use it to find which side of the circuit has the problem . Power or ground .
Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia
Electric Testing Techniques You Need to Know
You can find free wiring diagrams here
Enter vehicle info. Year , make , model engine size ! Under system click on lighting , then under subsystem click on exterior lighting.
If you look down at the second diagram you will see the light switch powers the trailer tow relay .

May 19, 2017 | Cars & Trucks

1 Answer

Turn signals & Flashers will not work on 2002 Dodge Dakota, replaced Combination Flasher unit, still no turn signal or Flasher

Hi Jeff , do you know how to test electrical circuits using a DVOM - digital volt ohm meter ? How to read an use a wiring diagram to pin point testing points in the turn signal circuits ? Here is a web site for free wiring diagrams .Enter vehicle info year ,make , model an engine size . Under system click on lighting ,then under subsystem click on turn signal lamp , Click the search button then the blue link . Then watch this videos an then test the power and grounds ,inputs to the Combination Flasher !
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
How to Use Multimeter to Troubleshoot Common Problems
The Trainer 18 Electrical Testing Tips

Jul 03, 2017 | Cars & Trucks

1 Answer

No power when i turn the key

Sounds like a bad ignition switch or a bad main electrical connection between the battery and the switch. Check all the battery connections and grounds for clean tight connections. Check for power going to the switch.

Oct 23, 2012 | GMC C1500 Cars & Trucks

1 Answer

Its actualy a 1kz 3.0 litre turbo deisel had water in fuel injector pump required replacment so replaced with s/h one off running engine reasembled engine injectors where supost to be serviced units...

Im wonderin if some of that water got into the cylinder area and bent a rod ruining the compression--did u ride thru a flood zone--mite want to do a test--also scan vehicle and test injector pump off engine

Aug 26, 2010 | Toyota 4Runner Cars & Trucks

1 Answer

96 Chevy blower motor wont work

If you have a test light,check for power at the blower motor,see if it will come on with a wire from battery positive ,to the positive on the blower motor,if it does not,check to see if the motor is grounded,then check to see if the relay has 12 volts to it.The relay should have 12 volts to it,with the switch off.Turn the switch on,and use test light only,touch the probe to all the terminals on the relay,one at a time,with the relay plugged up,when the test light touches the ground,on the relay,it will activate the blower motor,ground the test light of course.Use a test light to chase down the problem,it is the best toll for this,and is not exspensive.

Feb 12, 2010 | 1996 Chevrolet K3500

1 Answer

Wont start

Use a test light on the small terminal on the starter & see if it lights when key turned to start. Should be no power to it when key off and power to it when key turned to start. Voltmeter can be used if no test light.

May 31, 2009 | Plymouth Acclaim Cars & Trucks

1 Answer

My 93 bravada wont start since i replaced sending unit

check for power at the sending unit should have power for 10 sec on i belive the purple wire and the other wire will have power all the time power for 10 sec is what u want for fuel pump power ahd if u have power u should be able to hear fuel pump if you have power and do not hear pump pull sender out and check connection from pump to sender also check fuel connection from pump to sender

Sep 24, 2008 | 1993 Oldsmobile Bravada

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides