Question about 2007 Chrysler Sebring

Open Question

Right side headlight bulb replacement on 2007 chrysler sebring

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Replacing headlight in 1996 Chrysler Sebring JXI

piece of cake....
take off the two "star" bolts, one toward the center of the engine above the light assembly and the other toward the fender (it is very long). when you remove them both the entier assembly falls off into your hands and makes changing the bulbs much easier.

Posted on Sep 16, 2008

jgwhomeequip
  • 1902 Answers

SOURCE: replacing headlight bulbs on a 2006 chrysler sebring

Behind the headlight you should see a eletrical wires running to the headlight section. There will be a 2 inch round plastic ring. You grap the back of the bulb and turn it to the right which will release the bulb and the socket. You pull out the bulb and replace it the same way. If this doesnt help then get back to me.

Posted on Feb 06, 2009

  • 1062 Answers

SOURCE: Left low beam headlight on Chrysler 2003 T&C wont work while engine is on

Ill guarantee you have an electrical short on the left side of the headlight switch,circuit.From here its immpossible for me to go any further.Good Luck.,Get A Wiring diagram.

Posted on Apr 18, 2009

teemossinmia
  • 265 Answers

SOURCE: how to replace driver side mirror on a 2007 chrysler sebring ltd

Once you take of the door panel, you should have two or three nuts behind the black triangler shape cover..Once you take them off, you just reverse the procedure...To take the door panel off, you may need a flat head screwdriver, and a phillip screwdriver..You may have two or three screws to take off..One is by the door handle..One may be under the window switch..which you can pop that off with the flat head screwdriver...Then just pop the panel off, and disconnect all the connections..Should be no more than 3....Goodluck..

Posted on Dec 08, 2009

Testimonial: "Just what a needed, straight to the point."

  • 1 Answer

SOURCE: Replace headlight bulb on 2005 Chrysler Sebring.

No again. there are 2 9/32 bolts above the light assembly, remove those. One is long one is short. After removing those, the assembly can be coaxed out where you can access the bulb. It goes back in alot easier.

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the relay for the passenger side headlight on a 2007 Chrysler sebring?


Hi Im AL the owner of Big As Auto Repair

There is no relay for the pass side headlamp. I'm assuming you've already tried replacing the headlamp bulb and it doesn't work. If not, replace it first. For further assistance go to my auto-repair website here:
http://www.bigasautorepair.com/

Jul 03, 2015 | Chrysler Cars & Trucks

1 Answer

How to fix headlight on Chrysler Sebring


you could have the wrong bulb..could be bad connection...turn light on dim..take bulb from other side..and try it that way..before going any futher...

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.


try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

Chrysler Sebring 2008 headlight assembly removal


some times headlamp units have a plastic retaining clip on the underside of headlamp, does the headlight move from side to side? try to pull the headlight back from the top of unit then lift up the headlamp unit, if not it could be the headlamp adjusters holding unit in place.

Dec 06, 2013 | 2008 Chrysler Sebring

2 Answers

How do i get to my low beams on my chrysler 2005 sebring sedan i got to the high beams perfect but the low beams right next to it has a metal barrier surrounding it which makes it impossible


Unfortunately, the answer I have is not a happy one =(. My wife has a 2005. In order to replace the bulb you will have to pull the Crutons (plastic push pins) that hold the front bumber cover on, remove the Headlight housing & replace the bulb that way. Shame on Chrysler for making it so difficult, in my opinion. But I hope this helps you to change the bulb =)

Aug 26, 2011 | 2004 Chrysler Sebring

1 Answer

How to repace healight on 2006 sebring 4 door


pop the hood, there will be 2 screws at the top of the headlight.
Remove the 2 screws.
Pull the headlight out of the socket, not too far, wiring doesnt let you pull it too far out.
You can access the bulbs from there, or remove them and replace the headlight itself and pop the old bulbs (or new ones) back in.
Replace headlight to socket, make sure the coupling on the side is connected.
Replace the 2 screws.

Dec 03, 2009 | 2006 Chrysler Sebring

2 Answers

Replacing headlight bulbs on a 2006 chrysler sebring


Behind the headlight you should see a eletrical wires running to the headlight section. There will be a 2 inch round plastic ring. You grap the back of the bulb and turn it to the right which will release the bulb and the socket. You pull out the bulb and replace it the same way. If this doesnt help then get back to me.

Feb 06, 2009 | 2006 Chrysler Sebring

1 Answer

How do i change the headlight bulb in a 2005 sebring convertable


Lift up the hood, the bulbs are changed from the engine compartment
behind the lamp are connectors, pull it off, and the retainer that holds the bulb in
replace bulb
replace retainer
replace wire
close hood
usually takes longer to type than to do

Jul 14, 2008 | 2004 Chrysler Sebring

Not finding what you are looking for?
2007 Chrysler Sebring Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...