Question about Cars & Trucks

Open Question

350 intake torq specks - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Nissan motor vehicle v6 vg30 engine has water in oil.


if the headbolts were not torqed to the sync pattern or the intake manifold was torqed in sync it will leak water into ur crank case , whoever did the job have the run a compression check on ur engine and lets hope you dont have a cracked cylinder

Mar 16, 2013 | Cars & Trucks

1 Answer

2004 pontiac grand am 3.4 intake manifold torque speck


lower manifold center bolts 115 lb in, corner bolts 18 lb ft
upper intake bolts/stud 18 lb ft

Feb 26, 2013 | 2004 Pontiac Grand Am

1 Answer

HI HILUX SURF WITH 2LT DIESEL ENGINE CAN I GET CORRECT TORQE FOR. 1-TORQE FOR HEAD BOLT? 2-TORQE FOR CON ROD BEARING BOLT? 3-TORQE FOR MAIN BEARING BOLT?


Torque Settings Mains = 108NM
Big Ends = 54NM + 90° +90°
Flywheel = 122.5NM
Cylinder Head = 78 NM + 90° + 90°

Valve Settings
Exhaust = 0.40 mm - 0.50 mm
Intake = 0.20 - 0.3 0mm

Jun 30, 2011 | Toyota 4Runner Cars & Trucks

1 Answer

Need torque sttings for 350 pontiac chev 350 ,heads and intake settings


350 ENGINE CYLINDER HEAD TORQUE IS 68 FT LBS THE INTAKE MANIFOLD IS 35 FT LBS.

Jan 09, 2011 | 1988 Pontiac LeMans

1 Answer

I need torque specks for valve train for a 1987 nissan truk v6 3.0 litter


cylinder head bolts 40 - 47 ft lbs, intake manifold bolts 12 - 14 ft lbs. , intake manifold nuts 17 - 20 ft lbs. , rocker arm shaft bolts 13 - 16 ft lbs. exhust manifold bolts 13 - 16 ft lbs. i hope this helps.

Dec 22, 2010 | Nissan Pickup Cars & Trucks

1 Answer

No movement in any gears


thats a real simple unit, either the pumps input shaft sheared or the drive hub that that shaft engages into the torq converters spot welds broke. happens on rebuilt torq converters from time to time, either way its gota get pulled. a 2wd is very easy to remove and cheap to repair good luck!

Aug 26, 2009 | 1986 GMC Suburban

1 Answer

Replaced intake and oil is mixing with water on a


you have gotten one of your gaskets out of place or you put a gasket in wrong or you need to check the torqe on your bolts

Feb 21, 2009 | 1988 Mercury Grand Marquis

1 Answer

Intake manifold


i usually just tighten them hand tight using the cross pattern there is a tourque spec it is 44inch lbs i belive but never had a problem tighting them like i explained

Oct 13, 2008 | 1999 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...