Question about Cars & Trucks

Open Question

Hard to turn on jazzy chalr and after pushing and holding the button down for about 2 minutes it starts, sometimes flashes across and then i must turn it off and start over. once started it runs fine

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
leetamara
  • 702 Answers

SOURCE: Stalls when engne warms up

Your ECT (Engine Coolant Temp) sensor is bad. What's happening is at cold start it richens up the fuel mixture and as it warms up the ECM thinks it's still cold and essentially the "choke" is still on. Also check your coolant level. If you don't have enough coolant in you engine/radiator, the ECT doesn't know what to do so it thinks it's cold.

Posted on Jul 13, 2008

Ad
  • 1 Answer

SOURCE: Geo won't run

it may have jump time

Posted on Oct 12, 2008

emissionwiz
  • 76164 Answers

SOURCE: hard to start chevy 350 vortec

You will need to do a fuel pump pressure leak-down test, the pump must not loose more than 5 PSI overnight, u will need a cheap fuel pressure test guage, the test port is on the fuel supply rail to the injectors on the intake manifold, it looks like a tire valve but metal with a plastic cap on it, u may be able to borrow this guage from Kragen, Autozone or a parts store like them, if not they are very cheap, less than $20 US. Run the engine with the test guage hooked up, turn off the engine and then check it in an hour or so, if it drops more than 5 PSI then u will need to replace the fuel pump in the gas tank. One note make sure the connection for the guage is tight with no leakage or the test is invalid

Posted on Jan 16, 2009

  • 49 Answers

SOURCE: 2001 f150 starts hard

try a can of seafoam in the oil. I had same problem.

Posted on Feb 23, 2009

  • 362 Answers

SOURCE: 99 ram 1500. When it rains hard or for a prolonged

Check your Air Filter to see if it is wet, rain may be getting in the air intake.
Lone99star

Posted on Apr 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set the time on the clock on a 2008 jeep compass


push & hold time button til the hour flashes turn tuner knob to set hour, push tuner button to advance to minutes,turn tuner to set minutes,flash will time out

Nov 09, 2012 | 2008 Jeep Compass

1 Answer

I can not set my time radio


Turn off radio, hold down time button for a few seconds, and the hour will start to flash. Push tuner knob to switch to minutes. Push tuner knob again to finalize.

Mar 06, 2011 | 2005 Dodge Durango

2 Answers

How do i clear the maint reqd light on 2006 toyota carolla


With key off hold down the trip reset button and turn key on while holding it. You will see 5 small lines counting down to 0 on the odometer display. When it gets to 0 it is reset.

May 17, 2010 | 2006 Toyota Corolla

1 Answer

Chance time in cherokee 2005 with navigasion is no time botton


If you have a VIC (Vehicle Information Control), hold the set button down until the hours start flashing. Once the hours are flashing, hit the set button to change the hours until you've got the hours correct. Then hit the Select button and the minutes will start to flash. Hit the Set button until your minutes are correct and then hit the Select button again whereby the AM/PM button will flash, hit the Set button until your time's correct, then hit select to move to the day, date and year and when you're finally done, (after all the hitting of the SET & Select buttons, just hit the Select button and nothing will flash and your time is set. Should you have a radio that displays the time, push down and hold the TIME button until the hours begin to flash (with the radio turned off), then turn the volume wheel until the correct hour is displayed. To adjust the minutes, turn the Tuning knob until the minutes are correct. Once you're done, don't touch any of the buttons and the clock will display the correct time on it's own...when you've released all the buttons and dials.

"00 Buck"

Nov 06, 2009 | 2005 Jeep Grand Cherokee

2 Answers

Maintence light reset


One way that always works is to disconnect the battery for at least ten minutes. If the cause of the check engine light turning on in the first place is not fixed, then the light will come on again pretty quickly after starting the car.
To reset your service light here are the steps.

1. Get in your car and shut the door.
2. Put your key in the ignition
3. Turn your ignition key to position 1
4. Push in your Odometer reset button and hold it in while holding it move the ignition key to position 2 while holding down the odometer reset button.
5. After couple of seconds of holding the button down and the key in position 2 your service light will start to blink once that happens let go of the reset button and start the car.

Oct 05, 2009 | 1999 Jeep Grand Cherokee

1 Answer

How do I turn off service engine light on 1988 volvo 740 gle


One way that always works is to disconnect the battery for at least ten minutes. If the cause of the check engine light turning on in the first place is not fixed, then the light will come on again pretty quickly after starting the car.
To reset your service light here are the steps.

1. Get in your car and shut the door.
2. Put your key in the ignition
3. Turn your ignition key to position 1
4. Push in your Odometer reset button and hold it in while holding it move the ignition key to position 2 while holding down the odometer reset button.
5. After couple of seconds of holding the button down and the key in position 2 your service light will start to blink once that happens let go of the reset button and start the car.

Sep 24, 2009 | 1988 Volvo 740

4 Answers

2007 Volvo S80 V8 Sedan Service reset light


Install remote/key into socket.  Push and hold trip button on instrument cluster with all doors shut.  Push start button one time for key position one while holding trip button and count to five.  keep holding trip button and hit start button to key position two where all the warning lites come on the instrument cluster while still holding trip button.  Count to around ten and triangular warning lite should flash. Release button and remove key and then start engine.  May take a few attempts to reset this lite.  

Mar 30, 2009 | 2007 Volvo S80 V8 Sedan

2 Answers

HOW DO YOU Adjust clock on 2004 ford focus c-max?


FROM THE OWNERS MANUAL

8. Clock: Press and hold CLK button until the
hour digit flashes. Turn the volume
control to increase/decrease the
hours. Press again to set the minutes. Turn the volume control to
increase/decrease the minutes

Dec 03, 2008 | 2004 Ford Focus

1 Answer

Service light


key off, push in and hold trip odo, turn key to position 2 ( all dash board lights are now on) DONT START the car, KEEP the trip button pushed in, start the car IMEDIATELY the service light starts to flash, then release the trip odo button. Sometimes takes a couple of goes.

Sep 23, 2008 | 2002 Volvo S60

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...