Question about Cars & Trucks

2 Answers

I have a Dimplex stove fire CAB20E. One of the bulbs has gone in the flame effect and I can't get to it. What do I do?

I have another CAB20F and I can take the glass out which reveals the bulbs, but this one I can't budge.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,879 Answers

On some of those there are 2 black painted screws, on the front, which must be removed.

https://www.youtube.com/watch?v=UD3kROvvuX4
http://howtomendit.com/search.php?keywords=dimplex+electric&cat=&page=1
.

Posted on Dec 04, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 46,412 Answers

Perhaps a small squirt of wD 40 on the base will help and try wiggling it also

Posted on Dec 04, 2016

Testimonial: "No one did help me, that was the problem. The model is no longer made. Unfortunately, Dimplex has "moved on" to LED lighting for their stove and flame effect fires, ghastly, so info about the old models is very limited. Sincere thanks to both ray gallant and Geoff White. You are absolute stars. Happy Christmas!! Jan. x"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No flame. The auger works fine and the pellets are feeding in. There is no fire to burn them.


Do you have a user's manual? Most pellet stoves need to be lit before starting the auger to sustain the fire.

Feb 10, 2017 | Cars & Trucks

1 Answer

Hi, my Belling double electric oven has just gone pop and everything has gone off, even the clock. I've checked the main fuse board and nothing has been tripped. Any ideas what has occurred?


call an electrician for a systems check
possible that an element has shorted out and taken out a stove fuse in the back of the stove

Dec 14, 2016 | Cars & Trucks

1 Answer

Will not stay lite


probable wants a new thermocouple ( F F D flame failure device.)
or its not set directly in flame , or your flame jet is parsley blocked and the thermocouple is not hot enough to hold the gas valve open.
THERMOCOUPLES when hot generate a minute voltage that creates a magnet affect in the gas valve and holds it open if the thermocouple is burnt out or not set correctly the flame will not stay on . the black mark on your fire is a sign the gas is not burning correctly at that point causing ,may be due to oxygen
starvation , my suggestion is when the fire is off and cold give the part around the thermocouple a good vacuum to remove any build up of fluff /dust. if this does not work you need to get the thermocuple replaced and the fire serviced. good luck

Nov 19, 2016 | Cars & Trucks

2 Answers

Why is the fuel pump on 89 Nissan puck up not getting fire


You don't want fire on a fuel pump, gasoline and flames are not a good mix! You will burn your car to a cinder in minutes. Unless this is an insurance job of course?

Dec 04, 2015 | Nissan Cars & Trucks

1 Answer

Truck won't start.


one might think that there is a fuse or a relay gone bad or the fuel pump itself has gone the trip .

Jul 18, 2015 | Cars & Trucks

2 Answers

Is it true the energy bulbs made in china can burst and cause a fire


I have had some Chinese LED bulbs fail very soon after fitting but no flames so far.
B

Dec 29, 2014 | Cars & Trucks

1 Answer

Suncrest electric stove


check for faulty fan motor.;

Apr 25, 2013 | Cars & Trucks

1 Answer

I have a 06 poniac torrent with left side signal trouble. Im the mornings and off and on thru the day the left signal light on the dash stays on. Signal wont work on the car, then when light in dash is...


You have a Burned Out Bulb on the LEFT side or the FLASHER has gone bad *(YES, it can only effect one side). It also controls the BLINKERS and FLASHERS TOO

Apr 09, 2013 | Cars & Trucks

1 Answer

2001 mazda 626 es v6 oxygen sensor flamed up and caught fire


sulfur smell is excess fuel getting burned in the cat. convertor.

The o2 sensor itself may be bad... causing the ECM to get bad readings and send extra fuel that isnt burned during ignition.

Check the engine codes with an OBD reader, (even if the CEL is not lit) because the bulb may be out or missing.

If you get codes, ask the parts store or re-post here, and I can help you further.

Thanks for using FixYa - A FixYa rating is appreciated for this freebie question.

Feb 25, 2009 | 2001 Mazda 626

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...