Question about Buick Cars & Trucks

1 Answer

My 1999 buick lesabre passenger side blinker doesn't work only the front little yellow indicator come on solid. The rear doesn't turn brighter or flash but the entire driver side does.

When i brake the driver side and 3rd light will brighten up.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check your ground on the light that's not working first. Use a test light, check for power. If it has power, then the ground is probably bad. The older light sockets corrode and go bad.

Posted on Dec 04, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the ignition control module located on a 1990 buick lesabre


For 1990 Buick Lesabre 3.8L FI OHV 6cyl the Control Module-Ignition is located: Under hood, passenger side, front engine area, mounted on upper passenger side of cylinder head under ignition coil.

Hope helps (remember to rate this answer).

Apr 11, 2011 | 1990 Buick LeSabre

2 Answers

Turn signals will not work. They stay solid on the dash when you activate them so i replaced rear and front bulbs and checked all fuse`s. Also checked the grounds on the wireing from the lights still...


you have a bad blinker canister, its usually under drivers side dash,a little round canister, turn your hazard lights on, you will hear clicking thats the canister for them, the other one is for your blinkers

Nov 16, 2010 | 1997 Buick LeSabre

2 Answers

What size are stock tires for this car?


1999 Buick LeSabre Custom Front and Rear Tires P205/70R15
1999 Buick LeSabre Limited Front and Rear Tires P205/70R15
1999 Buick LeSabre PP (*) Front and Rear Tires P215/60R16

(*) PP = Performance Package

Other details can find in the Buick-Lesabre-Owners-Manual

Hope helps (remember rated and comment this).

Aug 06, 2010 | 1999 Buick LeSabre

1 Answer

Blinker issues


These are two seperate issues:

the light staying on solid green indicates a bulb blown at either the front or rear, this could also be a bad ground connection but usually is a bulb issue. If you replace the bulb, be sure to use bulb grease to seal our moisture.

As far as the signal arm returning to neutral and cancelling the signal, that is controlled by a part within the steering wheel itself, and could just be worn. It's a Plastic/Nylon piece that pushes the signal arm manually when you turn the steering wheel sufficiently. That would be a dealer part, or something purchased from a salvage vehicle.

good luck

Mar 12, 2010 | 1997 Buick LeSabre

2 Answers

Left turn signal flashes rapidly


If the left turn is flashing fast then this is a sign that either the front or rear indicator bulb has blown and will need replacing once you have done this then you should find it will work properly if not post me a message back then i can assist you further ok

Feb 13, 2010 | 2002 Buick LeSabre

2 Answers

Blinker wont work


Replace your "flasher relay, also know as a "blinker relay".Your local auto part store should carry them.

Sep 18, 2009 | 2001 Buick Regal

2 Answers

"Failed RH Indicator"


Check your right hand indicator bulbs, front and rear.
Simply a case of changing a blown light bulb.

Sep 17, 2009 | 2001 Jaguar S-Type

1 Answer

Right blinker dead left blinker works 2002 buick lesabre limited


RIGHT BLINKER dead ,front,back, or both..???? If front works, and rear doesn"t (REPLACE REAR BULB).....and vice a versa....If rear and front both don't work replace the FLASHER ..Flasher is located in the FUSE block area.......Listen to the operation of the LEFT or RIGHT flasher operation and you should notice a dirrerence....

May 17, 2009 | 2002 Buick LeSabre

3 Answers

98 Buick Lesabre Blinker Problem


If ALL Wiring in Trunk is Good Then Its The SWITCH = Multifunction Switch<<

Feb 11, 2009 | 1997 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...