Question about Dodge Cars & Trucks

1 Answer

I pull off tail light assembly took 4 screws out, but assembly wont came apart, is there a trick to it???

2014 Dodge Laramie need to replace right brake light.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,985 Answers

You probably don't need to take the assembly apart. The sockets holding the bulbs are probably visible. Just take the bulb holder and rotate it firmly about 1/4 turn counter clockwise, and it should come out of the assembly. Remove the burned out bulb, insert the replacement, check that it works, then put the holder back into the tail light assembly, rotating it 1/4 turn clockwise to lock it in.

Posted on Dec 03, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I put 2014 rims on my 2010. Tire pressure issues. screen on the dash is showing psi's blank. how do I reset? I assume these 2014 rims would have stock sensors in them, and there basically brand new.


Notice that the 2010 is listed, but not the 2014

Dodge

2014Challenger
2014Charger AWD 2014Charger RWD 2014Durango 2014Grand Caravan 2014Journey 2013Challenger 2013Charger AWD 2013Charger RWD 2013Durango 2013Grand Caravan 2013Journey 2012Challenger 2012Charger AWD 2012Charger RWD 2012Durango 2012Grand Caravan 2012Journey 2011Challenger 2011Charger 2011Durango 2011Grand Caravan 2011Journey 2011Ram 1500 Big Horn 2wd 2011Ram 1500 Big Horn 4wd 2011Ram 1500 Laramie 2wd 2011Ram 1500 Laramie 4wd 2011Ram 1500 Lone Star 2wd 2011Ram 1500 Lone Star 4wd 2011Ram 1500 SLT 2wd 2011Ram 1500 SLT 4wd 2011Ram 1500 ST 2wd 2011Ram 1500 ST 4wd 2011Ram 1500 Sport 2wd 2011Ram 1500 Sport 4wd 2011Ram 2500 Laramie 2wd 2011Ram 2500 Laramie 4wd 2011Ram 2500 SLT 2wd 2011Ram 2500 SLT 4wd 2011Ram 2500 ST 2wd 2011Ram 2500 ST 4wd 2011Ram 3500 Laramie 2wd 2011Ram 3500 Laramie 4wd 2011Ram 3500 SLT 2wd 2011Ram 3500 SLT 4wd 2011Ram 3500 ST 2wd 2011Ram 3500 ST 4wd 2010Challenger 2010Charger 2010Ram 1500 Laramie 4wd 2010Ram 1500 SLT 2wd 2010Ram 1500 SLT 4wd 2010Ram 1500 ST 2wd 2010Ram 1500 ST 4wd 2010Ram 1500 Sport 2wd 2010Ram 1500 Sport 4wd 2010Ram 1500 TRX 2wd 2010Ram 1500 TRX4-Off Road 4wd 2010Ram 2500 Laramie 2wd 2010Ram 2500 Laramie 4wd 2010Ram 2500 Power Wagon 4wd 2010Ram 2500 SLT 2wd 2010Ram 2500 SLT 4wd 2010Ram 2500 ST 2wd 2010Ram 2500 ST 4wd 2010Ram 3500 Laramie 2wd 2010Ram 3500 Laramie 4wd 2010Ram 3500 SLT 2wd 2010Ram 3500 SLT 4wd 2010Ram 3500 ST 2wd 2010Ram 3500 ST 4wd

Dodge

2014Challenger
2014Charger AWD 2014Charger RWD 2014Durango 2014Grand Caravan 2014Journey 2013Challenger 2013Charger AWD 2013Charger RWD 2013Durango 2013Grand Caravan 2013Journey 2012Challenger 2012Charger AWD 2012Charger RWD 2012Durango 2012Grand Caravan 2012Journey 2011Challenger 2011Charger 2011Durango 2011Grand Caravan 2011Journey 2011Ram 1500 Big Horn 2wd 2011Ram 1500 Big Horn 4wd 2011Ram 1500 Laramie 2wd 2011Ram 1500 Laramie 4wd 2011Ram 1500 Lone Star 2wd 2011Ram 1500 Lone Star 4wd 2011Ram 1500 SLT 2wd 2011Ram 1500 SLT 4wd 2011Ram 1500 ST 2wd 2011Ram 1500 ST 4wd 2011Ram 1500 Sport 2wd 2011Ram 1500 Sport 4wd 2011Ram 2500 Laramie 2wd 2011Ram 2500 Laramie 4wd 2011Ram 2500 SLT 2wd 2011Ram 2500 SLT 4wd 2011Ram 2500 ST 2wd 2011Ram 2500 ST 4wd 2011Ram 3500 Laramie 2wd 2011Ram 3500 Laramie 4wd 2011Ram 3500 SLT 2wd 2011Ram 3500 SLT 4wd 2011Ram 3500 ST 2wd 2011Ram 3500 ST 4wd 2010Challenger 2010Charger 2010Ram 1500 Laramie 4wd 2010Ram 1500 SLT 2wd 2010Ram 1500 SLT 4wd 2010Ram 1500 ST 2wd 2010Ram 1500 ST 4wd 2010Ram 1500 Sport 2wd 2010Ram 1500 Sport 4wd 2010Ram 1500 TRX 2wd 2010Ram 1500 TRX4-Off Road 4wd 2010Ram 2500 Laramie 2wd 2010Ram 2500 Laramie 4wd 2010Ram 2500 Power Wagon 4wd 2010Ram 2500 SLT 2wd 2010Ram 2500 SLT 4wd 2010Ram 2500 ST 2wd 2010Ram 2500 ST 4wd 2010Ram 3500 Laramie 2wd 2010Ram 3500 Laramie 4wd 2010Ram 3500 SLT 2wd 2010Ram 3500 SLT 4wd 2010Ram 3500 ST 2wd 2010Ram 3500 ST 4wd

How To Reset Your Tire Light - YouTube

2q==? 0:41 https://www.youtube.com/watch?v=r1GP2_qzizE
  1. Similar
Mar 1, 2011 - Uploaded by Garden City Jeep Chrysler Dodge Ram SRT Garden City Jeep Chrysler Dodge Ram SRT ... Tire Air Pressure Sensor - What is It - TPMS Warning Light ...

2011 Ram 1500/2500/3500 Tire Pressure Monitoring System - YouTube

2q==? 3:49 https://www.youtube.com/watch?v=cDxde0PKgfY
  1. Similar
May 9, 2011 - Uploaded by Ram Trucks Outlining the tire pressure symbol and maintenance tips.

How to Turn off the TPMS light - Dodge Owner Forums

www.dodgeownerforums.com > ... > Dodge Trucks > 3rd Gen Rams
  1. Cached
  2. Similar
Jul 2, 2010 - 15 posts - ‎9 authors My brother just got a 2008 1500 and the TPMS light is on. The dealer ... Does any one know how to reset the TPMS so that the light will turn off? Logged .... Quote from: dragonslayer169 on July 03, 2010, 08:14:37 am. Awesome ..... I have having a TPS issue on the new Ram that is ticking me off. I plan to try ...

TPMS Relearn / Reset procedures - TPMSDirect Takes the Headache ...

www.tpmsdirect.com/TPMS_Reset_Procedure_Chrysler_Dodge...Ram.../707.htm
  1. Cached
  2. Similar
TPMS Programming instructions for Chrysler, Dodge, Jeep, Fiat, Ram, and ... Schrader 20398 TPMS Relearn / Reset Procedure for Chrysler, Dodge, Fiat, Jeep, ... 2010 300 Touring. 2010 300C. Dodge 2014 Challenger. 2014 Charger AWD.

Reset low tire pressure warning? - DODGE RAM FORUM - Dodge Truck ...

www.ramforum.com > ... > 4th Gen : 2009 - Present > Exterior
  1. Cached
  2. Similar
Dec 11, 2013 - 10 posts - ‎3 authors So my low tire pressure warning goes off because it says the right front tire is low. ... It should reset, it may take a cycle or two but unless you need a new sensor it should be ok. ... It was automatic on my truck and it's a 2010.
put-2014-rims-2010-tire-pressure-atpwuitlrih2mybimxbaxrao-4-0.jpg


May 23, 2016 | Dodge Ram 1500 Cars & Trucks

1 Answer

How to change brake light bulb on a 2014 fiat 500L


https://www.fiatusa.com/download/pdf/manuals/2014-FIAT-500L-OM-1st.pdf

it's in your owners manual page 358 chapter 7

you need a torx 20 screwdriver or bit

Rear Tail, Stop, Backup And Turn Signal Lamps
1. Open the liftgate.
2. Remove the two screws and remove the tail lamp assembly.
3. Remove the four screws (using a T20 driver) and separate the backplate from the lamp housing.
4. Remove the tail, stop, or turn signal bulbs by pushing them slightly and turning counter-clockwise.
5. Remove the backup lamp bulb by pulling straight out.
6. Replace lamps as required and reinstall lamp.

Center High-Mounted Stop Lamp (CHMSL)
This light is an LED assembly. See your authorized stealership

Mar 30, 2015 | Fiat Cars & Trucks

1 Answer

Is there a trick to getting to the rear turn signal on a 2003 ford focus hatchback. I had removed the screw to the lens cover but I still cannot gain access to the turn signal bulb to replace it.


Replacing tail/brake/backup lights and turn signal bulbs (coupe)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. From inside the luggage

compartment remove the wing nut

of the rear light assembly cover.

3. Using a Phillips screw driver

remove the screw. The lamp is still

retained by a spring loaded clip.

Remove by gently pulling out the

light housing.

4. Turn the bulb socket counterclockwise as far as possible and pull it

out.

5. Pull the bulb straight out of the socket.

Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (sedan)

1. Make sure the headlamp control

is in the OFF position and then

open the trunk.

2. From inside the luggage

compartment remove the three wing

nuts of the light housing.

3. Gently pull the light housing to

the outside.

4. Turn the bulb socket

counterclockwise and pull it out.

5. Pull the bulb straight out of the socket.
Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (wagon)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. Using a screw driver remove the

fixings and trim from the body.

3. Remove the socket from the lamp

assembly

4. Pull the bulb straight out of the

socket.
Install in reverse order.


Hope this helps.

Zeppelinx12

Mar 03, 2011 | 2003 Ford Focus

1 Answer

How to I replace a broken tail light assembly?


Open hatch, remove the 2 screws on the side of the broken light, pull firmly and replace.

Jun 08, 2010 | 2006 Dodge Durango

1 Answer

How do I replace tail lights on a 1999 ford taurus?


You go through the trunk and on either side is the light housing unit that you remove 4 nuts from, pull out and there will be the individual bulbs to be replaced.

IN DEPTH:

In order to replace the light bulbs you will have to remove the entire rear light housing unit. In order to do this you must do the following:

1.Pop the trunk.

2.Loosen the trunk lining in order to reach the 4 nuts that are located on the right or left side and hold the light housing in place.

3.You loosen the trunk lining fabric by removing two small, black plastic fasteners that anchor the trunk lining fabric. These either screw loose or you will need to pop off using a blunt- nosed pliers ( a flat head screwdriver works in a pinch) by first pulling the square bit out (towards the direction of the back seat,) followed by the circular components.

4.Pull the fabric loose on either the left or right side to expose the 4 nuts holding the light assembly in place.

5.Now, look for the four gold colored washer and nut assemblies surrounding the tail-light assembly. Find yourself a 7/16 socket and remove those bad boys. The tail-light itself should be able to pop- out, otherwise you've missed a washer- nut.

6.Ease the tail- light assembly off of it's perch on the car and hold it red- side down. This will expose the wiring and "turn- locks" for the blinker and tail- light.

7.Remove the bulbs from the assembly by turning the turn- locks in the direction (counter- clockwise) indicated by the plastic molding, and pulling upwards, off of the tail- light assembly.

8.Pull the bulb from the turn- lock with a moderate tug of the hand.

Jan 24, 2010 | 1999 Ford Taurus

1 Answer

I need to change the rear tail light bulb; don't know how to access it. It is on a 2005 Dodge Grand Caravan.


open the rear hatch,find the two screws that are on the inside of the hatch opening for the lens you want off,remove the screws and pull the lens assembly out where you took the screws of,swing it out and unlatch it.

Jan 15, 2010 | 2005 Dodge Grand Caravan

1 Answer

How do i replace rear tail lamp assembly on a 2005 dodge magnum


you can get to bulbs, and screws to the tail light assembly, by pulling the liner by the light you want to work on

Oct 03, 2009 | 2005 Dodge Magnum

1 Answer

Real right turn signal light - Pontiac Montana SV6 2005


If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.

Dec 16, 2008 | 2005 Pontiac Montana SV6

1 Answer

Removing tail light


Drop the tailgate - there are two torx style bolts holding the lens assembly in place. Remove both, then with some gentle force, pull the lens assembly straight back(there are two self seating plastic bolts that hold the assembly into the truck frame, towards the cab).

Once undone, there is a strip of three bulbs on one wired base, and that base is screwed to the lens assembly (4 phillips screws). Unscrew those, and the lens assembly is free from the base. You can then remove the bulbs, insert new ones, and reverse the process. Good luck.

Nov 02, 2008 | 2004 Dodge Ram 1500

5 Answers

2005 kia rio brake light


I did it!!! To change the left brakelight, you open the hatch and remove the two screws on the right side of the light assembly. Then remove the cubby hole inside the left side of the hatch. Inside you will see 3 hex nuts. You only have to remove the one in the center (closest to you) not the ones down and inside. Once you remove that nut, pull the light assembly off (from the outside). There is a plug that will be holding it on. I carefully **** a straight screwdriver in the narrow side just to get it to move out a little, then you grab the whole thing and pull it out, you may have to wiggle it some. It seems like it will break, but it won't. It's just a metal thing sticking into a plug. The whole assembly will pull out (not too hard so you don't break any wires or connectors) then you follow the instructions to replace the bulb. Once the bulb is replaced, you simply line up the metal thing as you push the assembly back on. You might have to smack (open bare handed please) to get it back in. Replace all screws and stuff and that's it!

Aug 05, 2008 | 2005 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...