Question about 1993 Chevrolet C/K 3500

Open Question

1993 3500 chevy duley what insterment cluster will interchange

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 plymouth voyager p0700-p0755,came up have no curent to speed senser-check eng.light,blinker's or insterment cluster


If you are saying the instrument cluster is not working correctly, you need to check the fuse and the power circuit to the cluster.
Looking at the wiring diagram, I don't see any power going to the speed sensor, so I think it generates its own signal back to the trans control module.
The trans control module gets power from a trans control relay and a 20amp fuse.

Apr 16, 2013 | Cars & Trucks

1 Answer

Gauges on my 2000 Pontiac Grand prix stop working what can be the problem


is this all the gauges? if so remove the insterment cluster and with a diagram check the grounds and powers and checkthe plug clicks in tight if all is good get then get a cluster .this cluster does not use seiral data for the gauges

Feb 10, 2012 | 2000 Pontiac Grand Prix

1 Answer

Installing Dash light bulbs in a 1993 S-10 Blazer


To replace the blubs you have to take out the insterment cluster. This is done by romoving the light switch trim plate and disconnect the wirering harness. The remove the A/C heater control panel. Remove the plastic trim from around the insterment cluster. The unbolt and remove the insterment cluster and uplug the wires and the speedometer cable. This speedometer cables can be a pain in the **** but depress the spring clip and pull. The bulbs are accessed from the back of the cluster.
Bulbs in this cluster don't burn out very often and if none of the bulbs don't work it probley isn't the bulbs. In this cause make sure the dimmer switch is turned up if it is play with the switch see if the dash light flicker.
Oh also in the mauals they always tell you to disconnect battery when pulling electrial apart.

Oct 20, 2010 | 1989 Chevrolet S-10 Blazer

1 Answer

Where can i find someone in atlant ga to fix an insterment cluster for a 2003 chevrolet suburban


Call around to all the auto shops and see if they can. If they can not then ask them if they know of anyone that can fix your delema. If push comes to shove you might have to take it to a Chevy dealership and have them do it.

Jun 18, 2010 | Cars & Trucks

1 Answer

The insterment panel and rear parking lights went out


I have same problem. Fuses keep blowing in 1 to 2 days, which affect all interior & instrument cluster, parking/tail/turn signal, Lights which was 4 fuses. Good Luck & def. check fuses (3 locations)

Jun 01, 2010 | 1998 Honda Accord

1 Answer

Every once and a while my moms lincoln continetal starts beeping


somthing has gone rong with the insterment cluster. if all gages are working then i would just ignore it cause the insterment cluster is really pricey plus alot of labor to replace

Apr 18, 2009 | 1992 Lincoln Continental

1 Answer

Dashboard lights going out


thare are 5 illumonation bulbs in the back of the insterment cluster . the insterment cluster has to be removed to replace these lights - not an easy job- not a do it yourselfer. i did one at the job the oter day and i think the charge was around 300 dollars for labor and the bulbs are 80 cents a piece- if you have someone do the work make sure thay replace all 5 illumination bulbs while thare in thare blown or not

Apr 18, 2009 | 2003 Mercury Sable

1 Answer

Chevy brake spring assembly


do you not have the opposite side to refer to ?


shack

Apr 17, 2009 | Chevrolet Chevy Cars & Trucks

1 Answer

The insterment lights don't work


I know this might sound strange to you, but check the TAILIGHT fuse. Some GM cars suffer similar symptoms. Tailight fuse blows ( tailights inop and unknown to the driver ), and sort of like a warning of something wrong, NO DASH LIGHTS. Check this first. You still might have other probs

Mar 24, 2009 | 1994 Chevrolet K1500

1 Answer

Now knowing how to change the time on the clock


get the clock up on the insterment cluster then turn the right buttion in the insterment cluster and press in the set

Nov 17, 2008 | 2003 BMW 330

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...