Question about Jeep Cherokee

1 Answer

2014 jeep chekee....4 cylinder....how do I check the transmission...automatic

How often do I service it...seems we have lost the origional manual

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

Is this USA jeep or European? ????? (they run different drive lines, so.......?????)
the book is still free. the operators guide. back to 2004
most cars, you CAN"T check it, they removed the DIP stick
long ago. 10years?
in truth it's checked KINDA like a stick shift box, or transfer case.
that is covered in the SM service manual.
they jeep page changed, this month
you must log in to get your oper,guide.

https://www.mopar.com/jeep/en-us/care/knowledge-center.html

how often?, that depends now on who's religion you want to hear.
the marketeer. (car never needs service buy our's, now...bs)
the factory?(buy the SM and read?)
or you mechanic. (I'd talk to your ASE mech, ask him)

SM:
https://www.techauthority.com/en-us/

Posted on Dec 04, 2016

  • 1 more comment 
  • _-__-___-_
    _-__-___-_ Dec 04, 2016

    more places, pop up.
    try this

    https://carmanuals2.com/brand/jeep

    specifically?https://carmanuals2.com/get/jeep-cheroke...

    the 9 SPEED auto is covered in the chapter
    at the end, page 426+ (USA spec car)

    page 622 answers your question.
    in the Maintenance Schedule , section.
    download it and keep this PDF book
    while they are still free.
    page 654 is the service chart.
    note that Transmission is missing....? yup.

  • Anonymous Dec 04, 2016

    i found the secret page. back doors...http://owners.mopar.ca/en/

    bingo now bs, no failed zip, no failed phone numbers, per mopar new page, (is a failure)

  • Anonymous Dec 04, 2016

    http://jeepdied.com/

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

CVT Transmission not shifting past 2nd gear.


check level and condition of transmission oil

Mar 15, 2016 | 2008 Jeep Patriot

2 Answers

Fireing order diagram


cylinder firing order is: is 1-5-3-6-2-4 .... In Jeep Grand Cherokee Laredo ...Happy motoring.

Sep 04, 2014 | 1996 Jeep Grand Cherokee

1 Answer

How many quarts of transmission fluid does a 99 Chevy Cavalier 2.0 4 cylinder transmission require?


Automatic Transmission Fluid Capacities Automatic Transmission 3-Speed Pan Removal and Replacement 4.0 quarts After Complete Overhaul 6.9 quarts When draining or replacing torque converter, more fluid may be needed. Manual Transmission Fluid Capacities Manual Transmission 4-Speed Automatic Transmission Not Owner Serviceable Complete Drain and Refill 2.0 quarts

Jun 07, 2014 | Cars & Trucks

1 Answer

Replace ignition switch on 99 jeep wrangler


The ignition key must be in the key cylinder for cylinder removal. The key cylinder must be removed first before removing ignition switch.REMOVAL 1. Disconnect negative battery cable at battery. 2. If equipped with an automatic transmission, place shifter in PARK position. 3. Rotate key to ON position.4. A release tang is located on bottom of key cylinder.5. Position a small screwdriver or pin punch into tang access hole on bottom of steering column lower cover.INSTALLATION 1. If equipped with an automatic transmission, place shifter in PARK position. 2. Position key cylinder into steering column as it would normally be in the ON position. 3. Press key cylinder into column until it snaps into position. 4. Check mechanical operation of switch. Automatic Transmission: Be sure transmission lever is locked in PARK position after key removal. If key is difficult to rotate or is difficult to remove, the shift lever-to-steering column cable may be out of adjustment or defective. If key can be removed, release lever mechanism may be defective. Release lever mechanism is not serviced separately. If repair is necessary, the steering column must be replaced. 5. Connect negative cable to battery. 6. Check electrical operation of switch. ab7076e7-9719-44a3-b66a-8584c6b2a3c1.jpg bfaa43e6-23a3-4771-9d95-55c2c3bf0a78.jpg

Apr 08, 2014 | 1999 Jeep Wrangler

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

2 Answers

What type of Dana is in the rear of the 98 4cyl wrangler


Engine, with filter..........6.1 quarts [1]
Cooling System, Initial Fill..........10.6 quarts
AMSOIL Antifreeze and Engine Coolant
Automatic Transmission, 30RH Initial Fill..........4.1 quarts
Automatic Transmission, 32RH Initial Fill..........4.1 quarts
Automatic Transmission, Total Fill
3 speed 30RH..........7 quarts
3 speed 32RH..........8.6 quarts
Manual Transmission, AX-5 2WD..........7.4 pints
Manual Transmission, AX-15 2WD..........6.8 pints
Manual Transmission, AX-15 4WD..........6.8 pints
Differential, 181 FBI Front..........2.6 pints [2]
Differential, With 194 RBI Rear..........3.6 pints
Differential, With 216 RBI Rear..........4.1 pints
Transfer Case, 242..........3 pints
Transfer Case, 247..........3.4 pints
Transfer Case, 249..........3.4 pints
Transfer Case, 231..........2.2 pints

Feb 14, 2011 | 1998 Jeep Wrangler

1 Answer

My 2002 Escape is stuck in reverse


I am uncertain what escape you drive but if this is the 4 cylinder version, then you will require a new transmission or have your transmission serviced. You asked why? Because Ford did not put a transmission cooler on the 4 cylinder, but only on the 6 cylinder version with the tow package, which prevents your transmission from overheating. Furthermore, you have to change your transmission fluid at greater intervals to prevent harm to your transmission.

Moreover, is this a manual transmission or automatic
?. If this is a automatic, you maybe able to manipulate the shift linkage cable on the transmission and get it out of reverse.

Jan 04, 2011 | 2001 Ford Escape

1 Answer

Need avacuum diagram for a1980 258 6 cylinder out of a jeep wrangler where do i look or find this


1980-86 6-258 with manual transmission, except California

6cdc854.jpg



1980-86 California 6-258 with automatic transmission

4a41de8.jpg



1980-86 California 6-258 with manual transmission

3d98dc4.jpg



1980-86 Canadian 6-258 with automatic or manual transmission

73a3723.jpg


Hope this help (remember rated and comment this).

Mar 25, 2010 | 1989 Jeep Wrangler

2 Answers

Once shift in gear car wont move engine just revs


have your transmission check by a technician because i think you have a faulty clutch lining

Jul 02, 2009 | 1998 Jeep Cherokee

1 Answer

1997 jeep cherokee reverse lights aren't working...


if you check the bulbs like i suposed then if you have aa manual transmission there is a two wire sensor on the side of transmission after cheking the fuses make sure one of the wires at sensor gets power with ignition on and the with reverse on and ignition on the other wire meaning both wires have to have power if not replaace sensor but if it is automatic please make sure to add information at next question

Jun 03, 2008 | 1993 Nissan Sentra 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...