Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
pull the instrument cluster out and check the printed circuit and connector to it from harness, plug it in and out three or four times, this may cure the problem.
Posted on Apr 10, 2009
Had this problem on mine & the main dealer were stumped. Eventually found it myself after a lot of pocking about.Have a look at the wiring loom in the engine compartment. Looking under the bonnet look closely on the right hand side of the engine above the gearbox where the wiring loom passes from the rear of the engine over a metal bracket/support to the front. The loom has a tendancy to rub against the bracket and eventually damage the cables within. You will have to remove the air filter canistor & a few air hoses to get to the bracket. Good luck!
Posted on Jan 11, 2010
It sounds like your cable that goes into your cluster may be loose.Reach under the dash in the foot well and jiggle the wires.Then you can see if this makes a difference and you will know if it is this.Otherwise,it could be your speed sensor that goes into the tranny.Hope this helps.
Posted on Apr 17, 2010
Tips for a great answer:
Feb 17, 2015 | Holden Cars & Trucks
Feb 09, 2013 | 2006 Saab 9-3
Aug 31, 2017 | Ford Fiesta Cars & Trucks
Aug 12, 2010 | 2004 Audi A4
Apr 17, 2010 | 1996 Audi A4
Apr 10, 2009 | Ford F Cars & Trucks
Sep 04, 2008 | 2001 Volkswagen Golf
12 people viewed this question
Usually answered in minutes!