Question about Cars & Trucks

Open Question

Model 71147 Acctim MK16 9QJ How do I alter or disable the alarm function?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to disconnect the alarm


Depending if it is a aftermarket or a factory alarm, they should all have fuses that can be removed. By removing the fuse, you may lose your keyless entry option. Most aftermarket alarms have a siren that is usually mounted under the hood in the engine compartment area. I've seen where people have cut the wire going to the siren to disable it but keep the power going to the alarm system to keep the keyless entry still functional if it came with the alarm system.
Factory alarms usually use the existing horn for the alarm. If that is the case, you might need someone who is experienced to disable the circuit so that the horn will not sound if alarm goes off but the horn will still be functional when needed. Hope this helps.

Dec 20, 2014 | Cars & Trucks

1 Answer

Iturned ignition key on off on off on off,and,check engine light blinked twice,then twice again,then blinked five times,then four times,then five times,then five times,can you tell me what that means


This may have altered the programming of the alarm or ignition cutout. Your car may have a body control module which may have been altered. It may be more helpful if you specify more details including what model car you have and if it has an alarm or engine immobiliser.

Nov 05, 2014 | Cars & Trucks

1 Answer

Cant get the security alarm to disable 98 durango


The FACTORY ALARM DISARM WIRE IS
lt. green/orange '-', Located at a the
black plug in the drivers kick panel.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

If you want to use the alarm again all you do is remove the spliced wire
un hook your battery let it sit over night and hook it back up

Apr 03, 2014 | Dodge Durango Cars & Trucks

1 Answer

There is a blinking red led light under lower left side of driver and steering wheel attached to dash. It blinks ALWAYs!!!


This is most likely your "Valet" alarm disable switch. Use to disable your car alarm so you can keep your Alarm Fob and let a Valet, mechanic, friend etc. operate the car without the alarm being functional. If it is an after market alarm, consult the mfg's manual, if OEM contact dealer for operating instructions.

Jun 30, 2013 | 2004 Hyundai Tiburon

1 Answer

Alarm won't turn off


the valet key doesnt have a transponder chip in it, so it will allow physical turning of keyways and operations, but will not disable the alarm and often wont disable the immobilizer.

sorry to say i think you will need to get an autolocksmith , or main dealer to get you a functioning key with transponder chip mapped to your cars rfid system that will allow alarm to be enabled /disabled

Mar 23, 2017 | 2000 Volkswagen Jetta TDI

1 Answer

My didgit lights have faded


This is the car and truck section - you may want to repost this in radios or electronics.
I would say you will have to contact the company for a book.

Sep 06, 2012 | Cars & Trucks

1 Answer

My 97 Honda accord se wont turn over, and car alarm keeps going off


the alarm is the fault refer to your alarm manual to disable it, if you don't know about this unit it is best to seek help from someone qualified and available to look at it for you, it seems as if your alarm is set, most alarms have a starter disable function and the alarm going off is an indication that it is set.

May 18, 2012 | 1997 Honda Accord

1 Answer

I disconnected the battery and later reconnected it the only thing that happens is the headlights come on and the horn sounds how do i fix it


You need the keyless entry 'key fob' that came with the car originally to disable the alarm. This is a normal function of the alarm, in the event that a thief pops your hood and disables the battery to prohibit the alarm from going off, when the power is re-applied the alarm is to sound.

Hope this helps.

Good luck!

Feb 09, 2011 | 2008 Saturn Aura

3 Answers

Have a 2001 RAV4. Tried to unlock car with key on Passenger side. Activated Alarm. Forgot how to deactivate alarm


go around to the drivers door and use the key to lock and then unlock the door, or use the remote to unlock the car. if that doesn't work u have a problem in the security system and will need the system scanned.

Mar 19, 2010 | Toyota RAV4 Cars & Trucks

1 Answer

2002 Jeep Liberty Limited 3.7 V6 Auto with 4wd- Factory alarm system malfunction


all alarms have disable function usually located down underneath the driver side, look for a small toggle switch or momentary switch, turn the key to the on position , click the switch once or twice to the small red l.e.d light stays on constant.

Jul 18, 2008 | 2002 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...