Question about 1994 Chevrolet Cavalier

1 Answer

I have a 1994 2.2 manual chevy calvalier I was driving and I heard a pop then I lost speed as soon as I put my foot on the brake it was like they all locked up and the car hopped to a stop. After that I was having trouble moving the shifter from one gear to another I was still able to go in reverse I put in manual transmission fliud and that seemed to fix the problem temperary then the car would not move gears and came to a skidding stop and now it is stuck in first gear

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Sounds like you have broken a main shaft in the gear box due to lack of lubrication
it needs to be inspected
good luck
Cheers Rob.

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clicking noise goes away when braking


Look at the constant velocity joints on that side. When the rubber boot tears it lets road dirt in which fouls the grease and allows premature wear on the cv joint components.

Sep 03, 2014 | Nissan Maxima Cars & Trucks

1 Answer

Car will not accelerate


Further information will be required unless you would nlike a simple solution like.
Step one start said vehichle
Step 2 apply foot ti brake pedal and put gear selector in drive
Step 3 remove foot from brake pedal to accelerator pedal
Step 4 apply presure to accelerator pedal untill desired speed has been acheived
Note these steps will not work for manual transmission see section 37

For braking see section 22

Oct 13, 2013 | Hyundai Cars & Trucks

1 Answer

Fuse pops for brake lights soon as i put it in


This is an easy solution with potentially hours of looking. You have a short in a wire somewhere along the line. It could be from brake light to brake light or the wiring to the fuse panel itself. Another place to check is at the socket itself. Grab a meter and start eliminating.

Jan 07, 2013 | 1994 Plymouth Acclaim

1 Answer

1994 camaro Z28 Convertable automatic. When driving when you release the gas pedal there is no engine braking. Engine will return to idle instanly. At all RPM's. Transmission shifts smooth during...


I'd hazard a guess that the torque converter disengages from "lock up" when you lift your foot. This would let the engine instantly idle down, and would produce no braking effect from a closed throttle.

Try driving it (at a lower speed) in direct, rather than overdrive, and see if the same thing occurs, or if you get the expected braking effect when you lift your foot off the throttle.

Feb 23, 2011 | 1994 Chevrolet Camaro

1 Answer

Engine speeds up when holding brake


Vacuum leak, maybe inside brake booster.

Jul 05, 2009 | 1994 Chevrolet Corvette

1 Answer

How many quarts of transmission fluid does a 1997 chevy calvalier


auto
3 speed 7 quarts
4 speed 9.5 quarts
manual
2000 or older 2.0 quarts
2001 or newer 1.8 quarts

Mar 19, 2009 | 1997 Chevrolet Cavalier

2 Answers

Lost power steering and brakes


I'd say you broke a serpintine belt if you lost them both at the same time. Check your belts and see if you're missing one... You should have breaks and steering, just manual... hard to steer and brake...

Jan 07, 2009 | 2008 Dodge Ram 3500

1 Answer

Car wont start


when you press the brake pedal the brake master cylinder vacuum booster takes vacuum away from the engine and that slows the idle speed just enough to trigger the low pressure oil light. Pull the oil pressure sending unit out and hook up an oil pressure test gage, if the pressure is above 15 PSI hot engine idle in drive replace the oil pressure sending unit.

Jul 06, 2017 | 1994 Plymouth Acclaim

Not finding what you are looking for?
1994 Chevrolet Cavalier Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...