Question about Ford Cars & Trucks

1 Answer

Ford Taurus 2001 starter bolt length? - Ford Cars & Trucks

Posted by on

  • Sarah R Foster Dec 02, 2016

    The bolt is missing to my starter. I need to know what length the bolt is so I can replace it.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,807 Answers

These are special bolts, using any other bolt can and most likely will cause the starter to damage he flywheel teeth. Please contact the Ford dealer for these or try you auto parts store.

Posted on Dec 02, 2016

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: Spark plug firing order Ford Taurus 2001

1-4-2-5-3-6

Posted on Apr 08, 2009

tburtk
  • 158 Answers

SOURCE: torque on 3.0 ford taurus head bolts

40 ftlbs then 73 ftlbs then recheck at 73 ftlbs

Posted on Feb 06, 2010

  • 1146 Answers

SOURCE: I need a replacement keys for 2001 ford taurus

A good place to start is a ford dealer. Often they can cut you a key off the VIN number. You will have to go there in person., and some kind of proof of ownership would be needed!

Posted on Apr 02, 2010

csmock132
  • 4669 Answers

SOURCE: 2001 ford taurus 3.0 liter ohv serpentine belt

3.0 OHV Vin U24dba77.gif

Posted on Apr 03, 2010

  • 123 Answers

SOURCE: diagram of serpintine belt 2001 ford taurus

here it is4777b9b.gif

Posted on Jul 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the freeze plugs on a 2001 ford taurus


There are many freeze plugs on the taurus, and yes there is one behind the starter.

Apr 11, 2014 | Ford Taurus Cars & Trucks

2 Answers

Can't get the starter out of a ford Taurus 2004


either you took out the wrong bolt by the trans.... or the pin is stuck ... give it a whack with a mallet
should of taken out 2 ,13 mm bolts

Jul 28, 2011 | 2008 Ford Taurus X

1 Answer

2001 ford taurus 3.0 DOHC 24vavle motor the car has a new battery and starter but it wont crank


please try to pulldown remove first the battery connection.remove 2 bolts in the upper side and the lower part.remove starter B+,disassemble the starter check the solenoid or the carbon brush

Feb 24, 2011 | 2001 Ford Taurus

1 Answer

How do you change the starter in a 95 for taurus


disconnect battery remove nut holding wires on , remove the two starter bolts s remove starter install new starter bolt up new starter re hook up wires reconnect battery

Jun 13, 2010 | 1995 Ford Taurus

1 Answer

How to replace a water pump on a 2001 ford taurus


This is for a 3.0L and VIN S engine--

VIN U Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    • Negative battery cable
    • Accessory drive belt and tensioner
    • Water pump pulley
    • Heater hose
    • Engine control sensor wiring
    • Water pump
54afbf0.gif
To install:
NOTE The water pump bolts are of different lengths and must be installed in the correct locations.

  1. Install the water pump. Tighten bolts 1, 2, 3, 4, 5, 6, 7, 8, 9 and 15 to 15–22 ft. lbs. (20–30 Nm). Tighten bolts 10, 11, 12, 13 and 14 to 72–106 inch lbs. (8–12 Nm). Refer to the accompanying illustration for the bolt locations.
  2. Install or connect the following:
    • Engine control sensor wiring
    • Heater hose
    • Water pump pulley and tighten the bolts to 15–22 ft. lbs. (20–30 Nm)
    • Accessory drive belt and tensioner
    • Negative battery cable
  3. Fill the cooling system and check for leaks

Dec 08, 2009 | 2001 Ford Taurus

1 Answer

Air condition noise


Either the belt tensioner is going bad or the compressor or clutch is going bad. Is the belt tight? Check the deflection in the belt if it is to loose replace the tensioner. Also double check the belt part number and make sure they sold you the correct length belt.

Feb 16, 2009 | 2001 Ford Taurus

1 Answer

Starter motor


SOMETIMES YOU MAY HAVE TWO BOLTS ONE 8MM AND OTHER 12MM BIGGER ONE IS ALSO BELL HOUSING SECURING BOLT..

Sep 13, 2008 | 2001 Ford Taurus

2 Answers

2001 Ford Taurus, Harmonic balancer removal


I had this problem and had to block the teeth of the harmonic balancer with a 2-ton hydraulic jack handle (use an assistant to hold) while I torqued on the bolt with a 4-way lug wrench and a length of pipe. Took a minute, but finally we heard the "ping" of the seal breaking and were able to remove that BAB.

Aug 03, 2008 | 2001 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...