Question about Scion Cars & Trucks

1 Answer

Does anyone know the exact torque spec for a 2014 Scion TC crank pulley bolt? It's the 2arfe engine if that helps.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Scion Master
  • 2,428 Answers

Torque has to do with the size of the bolt and the thread per inch as well as the thread pitch and is not specific to any vehicle .Its got to do with bolt and the nut .
And seeing you want the crank pulley also known as the harmonic balancer spins in the direction that would tighten the bolt the finer the thread and larger bolt and the harder the metal the more torque it will handle but your in the range of 50 to 60 ft lbs if your worried get some blue loctite don't use red it will never come off with out a torch again .
It will tighten because of the direction the engine spins

Posted on Dec 03, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque spec that holds crankshaft pulley to crank on 2008 chevy uplander 3.9


My info says to use old bolt to make sure pulley is seated, torque to 92 ft lbs. Then use new bolt, torque to 92 ft lbs. Then turn extra 130 degrees.

Oct 28, 2015 | Cars & Trucks

2 Answers

What are the torque specs for belt tensioner ?


The 2 bolts are torqued to 18ft pounds. I cannot find a torque spec for the pulley

Aug 29, 2015 | 2008 Mazda Tribute

1 Answer

Torque specs for crank shaft pulley bolt on 1997 honda accord 2.2


the torque specs for the crankshaft pulley bolt on the 2.2 liter engine is 181 foot pounds

f3da1049-5f03-4476-b18a-1b251097af2d.png

Apr 25, 2015 | 1997 Honda Accord

1 Answer

Torque specs for 2.5l v6 Suzuki grand vitara,can anyone help pls


bolt torque of the engine or whole car.
or Engine power torque exiting the end of cranks shaft to the transmission.
if doing a job, name it?

Apr 24, 2015 | Suzuki Grand Vitara Cars & Trucks

1 Answer

Bottem pulley on engine block is making noise, I think the bearings are going out. What is this pulley attached to and can it be lubricated?


the bottom pulley is the crank pulley. It is attached to the crank shaft. It has two parts, an inner and an outer that are joined together with a rubber isolator. Over time the rubber breaks down and the inner part part of the puller will start to rotate independently from the outer part of the pulley creating a unigue clacking noise.

To solve this you'll need a standard crank pulley puller set. You'll remove the crank bolt and then use the pulley puller to pull the crank pulley off of the crank shaft. The install the new pulley making sure to torque the crank pulley bolt to the proper spec.

Nov 06, 2010 | 1998 Buick Park Avenue

1 Answer

I need the engine timing and the crank pulley torque specs.


Once you align the top and bottom timing marks, and install the belt and tight the belt tensioner, you are done, there is no distributor to adjust ignition timing, it is computer controlled. The torque for the crankshaft bolt is 80 foot pounds. Hope this helps, let me know.

Mar 07, 2010 | 1995 Ford Escort

2 Answers

How much oil does a 2006 scion tc 2.4 engine take


changing oil on Scion tc is actually 5000 mile in which your service engine light will come up and the oil actually 4 1/2 liters to be exact. i will 5/30 on yours

Jun 30, 2009 | 2006 Scion tC

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Brad Brown

Level 3 Expert

15941 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...