Question about Nissan Cars & Trucks

Open Question

How to torgue a 3.5 nissan v6 2004 - Nissan Cars & Trucks

Posted by on

  • Colin Stickland
    Colin Stickland Dec 02, 2016

    Hi david morey, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have changed cylinder head gasket and need the torque settings for the zd30 nissan engine


try this head torgue link.. that wont highlight

http://www.cylinderheadsaustralia.com.au/torque-settings

the ZD30 is listed half way down the list
and picture of tension sequence

HEAD BOLT TIGHTENING SEQUENCE.
• STEP ONE: 102Nm
• STEP TWO: Loosen All Bolts.
• STEP THREE: 44Nm
• STEP FOUR: +90*
• STEP FIVE: +90*
• IMPORTANT: ALL BOLT THREADS, BOLTHEADS AND WASHERS MUST BE LIGHTLY OILED.
• USING AN OLD HEADBOLT WITH GROOVE CUT DOWN THREAD, CLEAN THE BLOCK HEADBOLT THREADS.




why are these torque setting and sequence
numbers no longer on the VRS head gasket packaging

Oct 28, 2016 | Nissan Cars & Trucks

1 Answer

2000. Starts fine but why does it die when put in gear?


I think it is your transmission, i believe your torgue converter is locked up, what is happening, when u put it in gear the torgue from the engine is put into coverter, it has a series of cluthes inside that get tighter as force is applied by your transmission, however if the torgue converter is seized, then all of the motors energy is being applied to your trans, then to your axles, since your car is on the ground and not moving it kills the motor.

Sep 24, 2015 | Honda Accord Cars & Trucks

1 Answer

Need to get torgue specs for cylinder head


My best suggestion is to order the service manual for the vehicle. They range in cost but you can get them for around $30.

Sep 08, 2014 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Torque settings for Nissan na 20 cylinder head


I need the torgue settings for Nissan Hardbody NA20 engine
: Mains bearings, Big ends and flywheel as well as timing belt settings

Feb 11, 2013 | Cars & Trucks

1 Answer

Need torgue specs & sequence for upper & lower


Lower: Torque to 28 N·m (250 in. lbs.)

Upper: Torque to 12 N·m (105 in. lbs.)

Sequences below:

mf_grimm_1.jpg

mf_grimm_2.jpg

Good luck.

Jul 23, 2011 | 2004 Dodge Intrepid

1 Answer

Im needing the torgue settings of the cylinder head bolts and big end bearings for a Nissan Navara 4.0 V6 Petrol engine..


Hi mate,

I did forget to tell you to ensure that you turn the connecting rod bolts a further 90 degrees after the first setting.

Thanks

Jason

Jul 14, 2010 | Nissan Pathfinder Cars & Trucks

1 Answer

Head bolts


I'm assuming you meant a 1.8L 4V, if so the torgue settings for the head bolts are
stage 1: 30 ft-lbs
stage 2: 44 ft-lbs
stage 3: Angle-tighten a further 90-degrees
stage 4: Angle-tighten a further 90-degrees

Also I recommend you buy new cylinder head bolts from the vdub dealer, they say you don't have to with a gas engine but only with diesel engines you should, from my past experience it felt like the old bolts were going to snap off to be safe buy new ones. If you have never done this before "stage1" this means each bolt gets this one time, then after you have done each bolt at this torgue then you do the bolts again (stage 2) with this torgue ect. Remmeber to always cris cross your bolting and work from one side to the other the same time for each stage. Vdubs 4-ever !

Mar 23, 2009 | 1997 Volkswagen Golf

1 Answer

Cylinder head


cylinder head are nissan sentra's no 1 problem. you should've done a pressure test on ur head. if dats okay, replace the bolts as they wear out over the years....torgue as per manufactoring specs...

Jun 26, 2008 | 1989 Nissan Sentra 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...