Question about Cars & Trucks

Open Question

How do I change a cylinder on a Roco Loft tap

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tapping sound in number 1&2 cylinders after i changed sparkplugs to right ones could it be my timing chains


unlikely the timing chain if its only heard on cylinders 1&2 if it was timing chain it happen on all cylinders.

Oct 04, 2016 | Cars & Trucks

1 Answer

1999 sebring truck wont open. Botton want ethier


Stick the key into the cylinder after putting some wd40 in it. Then tap the key forward with rubber mallet, like youre tapping it into the cylinder even more. It will turn and open the trunk after the 2nd or 3rd tap.

Sep 25, 2014 | 1999 Chrysler Sebring

1 Answer

2004 trailblazer How do I change a locked lock cylinder, it wont turn at all and the steering wheel is not locked.?


if there is a small hole on cylinder put a paper clip in it and then see if it will release the cylinder

Mar 19, 2013 | 2004 Chevrolet TrailBlazer

2 Answers

99 grand cherokee with 4.7l cylinder 8 misfire. changed plugs, coil pack a few times, still tapping away. exhaust doesnt smell rich. alittle bit of oil on the plug though...


Hi, when you say tapping--you mean the cylinder is making a tapping noise? If yes, that is a bad lifter/lash adjuster that is not allowing the valve to open fully. This will cause a misfire, but even if it didn't, it would soon wear out the can lobe and then require a major repair.
If it's not tapping, please see my tip at http://www.fixya.com/cars/r6715318-causes_gasoline_engine_misfires . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me.

Jan 22, 2011 | 2002 Jeep Grand Cherokee

1 Answer

I have a 2002 Envoy, and have recently had a code come up that cylinder #4 is misfiring....I just had the spark plugs changed and ran fuel injector cleaner through it and it is still running rough when you...


your issue may be a stuck fuel injector. check the resistance through the injector and compare it to a known good one. They should be the same. If not then replace the injector. If the resistance is the same then the injector is clogged. A redneck way or freeing up the injector is to put a long ratchet extension on it and tap it with a hammer while the engine is running and the electrics are hooked up. Tap easy because its just cheap plastic, but what the hell you will need to replace it anyways if this doesn't work. tap, tap tap tap tap. It just may dislodge whatever **** is clogging it up.

Make sure you are getting a reliable spark to that cylinder to rule out a bad ignition coil.

Jan 10, 2011 | GMC Envoy Cars & Trucks

2 Answers

Tapping sound in my top cylinder


Unplug the spark plug wire to the cylinder that seems to be close to the noise. If after unplugging the correct cylinder if the noise stops, you have internal damage that will need repaired.

Jan 15, 2010 | 2004 BMW 5 Series

1 Answer

I am putting in a new shower and want to put in a pump to increase the flow of water to the shower head,what pump do I need? I will put it next to the hot water cylinder in the airing cupboard,I also want...


First of all, the normal water pressure is anywhere from 50 to 70 lbs. Why do you need a pump? What you need is just water pressure. The shower head will only put out a fraction of that pressure with the valve body inside the head. Since you do not say what water pressure you have, check all the pressure lines to make sure there is no blockage. As for the water tank, well, 50 gallons is always better.

Dec 01, 2009 | Cars & Trucks

1 Answer

Pluge came out when driving re tapped now it hesitates changed coill and allpluges v10


may have damaged valve train. check compression on affected cylinder.metal particals may have fallen into cylinder.usually to repair plug threads the head must be removed.

Nov 03, 2009 | 2001 Ford F250 Super Duty Super Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...