Question about Cars & Trucks

Open Question

2007 Heritage- odometer display on all the time?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset oil service required


Instructions1 Sit in the driver's seat of your ES 350. Push the "Odometer/Trip" button on the dash until "Trip A" appears on the display with the current mileage. 2 Hold down the "Odometer/Trip" button until the display flashes to indicate it has reset. 3 Insert the key into the ignition and turn it to the "ON" position. Do not start the car. Watch the odometer display for "000000." Turn the key to the "OFF" position and remove it from the ignition

Jun 26, 2014 | 2007 Lexus ES 350

1 Answer

Emergency reset button on aveo 2007


Press the reset button, located on the instrument panel cluster next to the trip odometer display, to toggle between the trip odometer and the regular odometer. Holding the reset button for approximately one second while the trip odometer is displayed will reset it.

miles traveled diagnostic

Nov 13, 2012 | Cars & Trucks

1 Answer

After disconnect and reconnect the battery of my opel antara, the indication of odometer displays only 888... for all indications. How can i reset it?


This solution will be of great help to you,even in the case of future or other dashboard problems;
Instrument cluster consists of electronic analog gauges, various warning lights, and optional tachometer. Vehicles equipped with tachometer have an electronic vacuum fluorescent transmission range indicator (PRND3L),odometer and trip odometer display. Vehicles without tachometer are equipped with a cable-operated transmission range indicator.
Instrument cluster is equipped with the following warning lights:
Battery voltage.
Cruise (speed control).
Door ajar.
Fasten seat belt.
Lift gate ajar.
Low fuel level.
Low windshield and washer level.
Traction Control.
The Body Control Module (BCM), which receives input from various sensors, sends display information to instrument cluster and operates gauges. Instrument cluster incorporates a self-test diagnostic feature to identify electronic problems. BCM, Powertrain Control Module (PCM), and Transmission Control Module (TCM) are continuously monitored by the diagnostic system.

SELF-DIAGNOSTICS
With ignition off, press and hold TRIP and RESET buttons while turning ignition switch to ON position. Continue to hold TRIP and RESET buttons until odometer window displays CODE (approximately 5 seconds). If problem exists, system will display diagnostic trouble codes. See DIAGNOSTIC CODE CHART table. If no problem exists, Code 999 (end test) will be displayed.
DIAGNOSTIC CODE CHART
CodeDescription
110.......Cluster Memory Fault
111.......Cluster Calibration Fault
905.......No CCD Bus Message From TCM
921.......Odometer Fault From BCM
940.......No CCD Bus Message From PCM

After diagnostic code display ends, instrument cluster will go into each of the following tests in order:
Dim test.
Calibration test.
Odometer segment test.
Electronic Transmission Range indicator segment test.
Dim Test
CHEC-0 will be displayed in odometer window. Instrument cluster will dim Vacuum Florescent (VF) display. If VF displays do not dim, a problem in instrument cluster exists. See BODY CONTROL COMPUTER TESTS in BODY CONTROL COMPUTER article.
Calibration Test
CHEC-1 will be displayed in odometer window. Each of instrument cluster gauges will move sequentially through each calibration point. See GAUGE CALIBRATIONS table. If gauge needle is not calibrated properly, a problem in instrument cluster exists.

Odometer Segment Test
CHEC-2 will be displayed in odometer window. Each segment of odometer will light sequentially. If any segment does not light, replace instrument cluster.
Electronic Transmission Range Indicator Segment Test
CHEC-3 will be displayed in odometer window. Each segment of electronic transmission range indicator will light sequentially. If any segment does not light, replace instrument cluster.

Sep 10, 2012 | 2007 Opel Antara 2.0

2 Answers

Hi, how do i put off ''maintenance required'' sign on my toyota camry 2007 car dashboard?Just did the servicing, the sign is still there?


with the key in the off position press and hold the odometer trip reset button on the dash. Turn the key to the run position while continueing to hold the reset button, do not start the car. The odemeter display should change to all dashes and then the dashes will start to go off one at a time. Once they are all out the odometer will display all zeros and then return to its normal display. Sometimes the trip A odometer needs to be displayed before starting and sometimes the trip B.

Your owners manual will give you some more insight if needed.

Sep 29, 2010 | 2007 Toyota Camry

1 Answer

2007 TOYOTA TUNDRA MAINTENANCE REQUIRED LIGHT FIX


If it is the same as 2006 model
Put the key into the ignition and press the odometer button. While holding down the odometer button, turn the key to the on position. You will see "-----"on the odometer display. It will count down "-----" "----" "---" "- -" "-". Then you will see zeros on the odometer display "000000". You can now release the odometer button. This will reset the maintenance light on your dash!!!!!!

Aug 26, 2010 | 2007 Toyota Tundra

1 Answer

My required matenance light came on in my 2007 scion tc is this a very serious problem


Make sure the car is in "off" position.
Press and hold the odometer button.
While pressing the button switch the starter to 'on' position.
You will see 5 lines appearing on the odometer display. The lines will vanish one by one.
Release the odometer button.
Light will be off!!!!!

(Note: each line on the odometer display represents1000 miles. I5 lines mean 5000 miles, meaning that the light will be turning on after 5000 miles. To reduce the mileage to, lets say 3000 miles, realease the odometer button if 2 lines are vanisahed)

Aug 19, 2010 | 2007 Scion tC Coupe

1 Answer

How do you change the odometer display to the total actual mileage driven in a 2007 Toyota Avalon?


You can't at least not legally.

The TRIP odometer however may be accessed through it's own set of instructions if it has that feature saved in it's memory.

Check your owner's manual it should be in there.

Mar 31, 2010 | 2007 Toyota Avalon

2 Answers

How do you reset the change oil message on a 2007


Ford Explorer, Mercury Mountaineer, 2002-07
To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the SET UP control to access the System Check mode. Press and release the RESET button to display “OIL LIFE % HOLD RESET NEW” is displayed. Press and hold the RESET button for 2 seconds until “IF NEW OIL HOLD RESET” is displayed. Press and hold RESET button until “OIL LIFE SET TO 100%” is displayed.
Ford Five Hundred, Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle the display between the odometer and trip odometer. Tap on the ODOiTRIP button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset.

Jan 06, 2010 | 2003 Mercury Mountaineer

1 Answer

I had my 2008 Toyota Avalon in for a regular oil change . The technician forgot to clear the maintenace requied light on the dash .


Set your odometer display to Trip A. Turn the ignition off. Hold the odometer stalk in and turn the car to on.(not start). The odometer display will show -------------, keep holding the stalk in until they the all go away and you see 000000. The Maint light is now reset.

May 18, 2009 | 2007 Toyota Avalon

2 Answers

07 camry oil filter location v6


The oil filter is no longer a "spin-on" type filter. Toyota has changed to the "cartridge" type filters that are in a cylindrical housing on the engine. You need to remove the filter housing to access the cartridge. Make sure that you replace the o-rings that come out with the cartridge filter with the new ones supplied in the new filter box. To reset the light, follow these directions:

Turn the key ON, do not start the engine.

Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..

Now release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

Jan 03, 2009 | 2007 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...