Question about 1986 Chevrolet Camaro

1 Answer

1986 2.8 camaro starts an dies, but will run on spray. new computer, dist. injectors an pump.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 76,132 Answers

Hold the ignition switch just off where the engine cranks after it starts, if it stays running you need to replace the ignition starter switch. This is the switch at the bottom of the steering column that the key cylinder operates via a rod. See photo below.
1986 2.8 camaro starts an dies, but will run on sp - 26380888-ycldav1j2xqu0dfv4h5tom5t-2-0.jpg

Posted on Dec 01, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fix rough idle and stalling on 1986 S10 blazer.only keeps running if pumping gas pedal. was running good and all of a sudden started dying out.


I would start by changing the fuel filter. Run some injector cleaner through it. And check for more of those rotten lines. You can check by spraying a little starting fluid around the vacuum lines. Be careful though. Its flammable. But the engine should speed up if you have a leak.

Mar 09, 2015 | 1986 Chevrolet S-10 Blazer

1 Answer

My 86 s10 has a no start problem. It's not getting n e fuel to the injector. The fuel pump isn't even kicking on. It's a brand new fuel pump with sending unit. Checked fuse n it looks good n the relay is...


you may have a bad moduel in the dist i know this may sound stupid but i have sean many of these problems one side of the moduel will go bad and not send a pulse signal to the ecm to activate the fuel pump but will stil fire the plugs

Jun 20, 2014 | Cars & Trucks

1 Answer

Just bought 86 2.8 camaro new fuel pump relay fuse and still no power to pump. Will run as long as i spray starting fluid in intake... Please help..


Recheck fuel pump, and or fuel pressure coming from the fuel, also may need to check or replace fuel filter

Jan 12, 2014 | 1986 Chevrolet Camaro

3 Answers

My 1989 camaro runs when I pour gas in the throttlebody but then dies when the gas runs out


I guess my first question is how do you know the injector has fuel ?
You would need to know if the injector is getting voltage and pulse from the computer, and if the fuel pressure is enough to allow the injector to spray.

Dec 13, 2012 | 1989 Chevrolet Camaro

1 Answer

I do not get a start up pluse on 91 Camaro RS 305


I assume you are not getting fuel spray from the injectors ?
If you are getting voltage to the injectors you should be able to ground and get a spray. If no spray, they may be stopped up from sitting.

Jun 23, 2012 | Cars & Trucks

1 Answer

89 suburban. No spray from injectors after replacing ESC


The fuel pump should be in the 20s. Also it could be losing presure slowly. Leave the fuel pump pressure gage on for at least 2 to 3 hours to see if it is losing pressure - It's a start

Oct 14, 2009 | 1989 GMC Suburban

1 Answer

My 1986 gmc s15 will not stay started unless you keep shooting starting fluid in it. i have checked all fuses, changed the fuel pump and fuel filter.


Sounds like it only runs on starter fluid.sort of. Mine is an 84 with a carb. You may have a bad fuel injector or dirty at best. Have your checked for good spark or dist rotor pointing to #1 in dist cap at TDC. The timing chain may have worn and jumped a couple of teeth

Sep 26, 2009 | 1986 GMC S-15

1 Answer

1994 chevy suburban, no fuel coming from fuel


Put an injector noid light at the injector plug terminals to see if your getting a signal from the PCM(computer).If not try to find a computer from the same vehicle that works and swap it into yours to check.A PCM swap will take about 15minutes.

Sep 23, 2009 | Chevrolet Suburban 1500 Cars & Trucks

2 Answers

86 toyota corolla, dies at stoplights and idles rogh


well you could try to get a vacuum gauge and see if your car reads what it supposed to and if you buy one it could tell you what it could be.

May 20, 2009 | 1986 Toyota Corolla 2 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...