Question about 2000 Pontiac Montana

1 Answer

How do i install a new front turn signal bulb on my 2000 pontiac montana

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Pontiac Master
  • 3,854 Answers

You have to remove the headlight assembly to remove the turn light assemble. There are two mounting bolts that hold the headlight assembly to the frame that needs to be removed and one mounting bolt that holds the turn signal light assembly on the headlight assembly that needs to be removed. Once all three bolts (black plastic in colour with a wing nut) have been removed the headlight and turn signal assembly can just be removed. Take note that the assembly has a guild slot to be guild in place back when re installing the head light and turn signal assembly. Good luck and hope this helps. Keep me posted and I'll try to explain in a different way if i was un clear, Harder to explain then doing the job it self. 

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left front turn signal was not working, and i replaced it with a new bulb but it did'nt work...please help .. ty


try changing the signal flasher. note the e-flasher looks the same. when you find a flasher turn on the e-flasher so you know you have found the signal flasher. they are usually in the same general area.

Aug 12, 2015 | 2006 Pontiac Montana SV6

1 Answer

I own a 2005 Pontiac Montana. My drivers side front turn signal went out. My husband tried to take out the right side bulb to see what bulb to purchase. When he tried to get the right bulb out the...


there shoild be a pull out panel under the dash pull it out to check the fuses there should be a diagram of the fuse location on the back of the panel

Oct 23, 2011 | 2005 Pontiac Montana SV6

1 Answer

How do you get access to change the front right turn signal bulb on a 2005 pontiac montana SV6?


Open the hood. If you cannot gain access, the grill of the vehical will have to be removed. This will give you access to the bulb.

Apr 17, 2011 | 2005 Pontiac Montana SV6

1 Answer

I want to know how to change the bulb in my headlight of my 2005 pontiac montana?


1. Open the hood.

2. Remove the front turn signal/parking lamp
assembly. See Front Turn Signal, Sidemarker and
Parking Lamps on page 5-46.

3. Pull the assembly away from the vehicle.

4. Unscrew the black retainer ring that holds the bulb
assembly in place.

5. Pull the bulb assembly straight up from the
lamp housing.

6. Unhook the electrical connector by lifting up the
blue tabs and pulling the bulb out.

7. Install the new bulb through the black retainer ring
and into the electrical connector.

8. Tighten the black retainer ring in place. Push the
bulb firmly enough so that the blue tabs hook over
the tab on the bulb.

9. Carefully put the bulb assembly back into the lamp
housing. Be careful not to damage the bulb on the
headlamp aiming bar.


Same guide is here in the manual along with pictures.

http://www.extendedgmwarranty.com/owners-manual/pontiac/2005-Pontiac-Montana.pdf

On page 370

Mar 02, 2011 | Pontiac Montana Cars & Trucks

2 Answers

2002 Pontiac Montana. Front passenger side turn signal doesn't blink but the bulb is working as a running light. The faulty turn signal connection causes the right turn signal to blink excessively fast. Do...


Need to replace the bulb. There are 2 filaments in the bulb. 1 works parking light the other is turn signal. It flashes fast to alert you that it has a blown out bulb.

Jun 25, 2010 | 2002 Pontiac Montana

1 Answer

Replace front right turn signal bulb


I replaced the front right turn signal on my 2005 Pontiac Montana by reaching up from underneath. I tried removing the battery but the opening from above was too small. I was able to pull the ground effects open enough to get my arm in. When you reach the bulb holder feel for two wings on the bulb socket and give the whole socket a quarter turn to and it will release. The wires are long enough so the entire bulb holder will drop down below the vehicle so you can easily replace the bulb.
Reverse the step to put it back in. You will not be able to see what you are doing so I had someone guide me by watching from above. Took less than 10 minutes once I decided to change the bulb from the bottom. I did not need to jack the vehicle up or use ramps.

Jun 14, 2010 | 2005 Pontiac Montana SV6

1 Answer

2000 pontiac montana. I want to replace the driving ligh bulbs. the under the headlights what size is it?


Fog/Driving Light Bulb Size: 880
Here is the rest of the bulb size used in your Montana.
2000 Pontiac Montana Auto Light Bulb Diagram
Low Beam Headlight Bulb Size: 9004
High Beam Headlamp Light Bulb Size: 9004
Parking Light Bulb Size: 4157NALL
Front Turn Signal Light Bulb Size: 4157NALL
Rear Turn Signal Light Bulb Size: 3156
Tail Light Bulb Size: 3057
Stop Light Bulb Size: 3057
High Mount Stop Light Bulb Size: Assembly
Fog/Driving Light Bulb Size: 880
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 3156
Front Sidemarker Light Bulb Size: 194
Ash Tray Light Bulb Size: 558
Glove Box Light Bulb Size: 194
Map Light Bulb Size: 168
Dome Light Bulb Size: 562
Step/Courtesy Light Bulb Size: 168
Trunk/Cargo Area Light Bulb Size: 212-2
Daytime Running Light Bulb Size: 3157NALL
Thank you for using fixya.


Apr 30, 2010 | 2000 Pontiac Montana

1 Answer

I have a 2000 pontiac montana and the lights are not working righ


If you live in a area in which salt is used on the roads, you probably have a corroded ground connection. These can be tough to find since there are several grounding points in most vehicles. When a ground fails, the current (the applied 12V) will find its own path to ground and can pass through different light bulbs on the way. If it was only the signal flasher creating problems, this can be caused by a single failed light bulb; the flashers are thermal devices and when the current is lower than it should be, the rapid flashing alerts you to the failure.
You might consider buying an after-market service manual from Haynes (my first choice) or Chilton. The manuals I have for our various vehicles give a general location for the grounding points; for example, 'Right side engine'

Jan 02, 2010 | 2000 Pontiac Montana

1 Answer

1998 pontiac transport/montana has not tail or break lights...turn signals blink fast or not at all. changed rear bulbs and noticed carbon on front build up on front bulbs. Help!


If one of the filaments in the bulbs is burned out, the remaining working lights will flash alot quicker.
Check the bulbs, and replace if the filaments are broken.
If the front bulb has a carbon build up it blown out...change it..
Once the bulbs are replaced your signals should work properly.

Dec 09, 2009 | Pontiac Trans Sport Cars & Trucks

1 Answer

2000 Pontiac Montana Brake Lights.


the boards in the tail lights have issues the plugs melt and they screw up the grounds. if your dash light signal indicators or on steady at night then chances are you will need new harnesses and light board assemblies

Mar 19, 2009 | 2000 Pontiac Montana

Not finding what you are looking for?
2000 Pontiac Montana Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...