Question about 2004 Ford Explorer

1 Answer

Brake lights and turn signals will not work on 2004 ford explorer. Fuses are all fine, new turn signal switch installed as well as electronic flasher relay. What am I missing??? Please help!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 11,457 Answers

Do you know what voltage drop is ? This is how you would find your problem ! Is the problem on the power side or the ground Side ? Voltage Drop Testing Automotive Circuits We test , not guess !

Posted on Dec 01, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2002 Ford Explorer turn signals and emergency flashers work no break lights? Fuse or switch?


David I would check your brake switch. If you have volt meter you should get voltage on one side then push brake now should get voltage on both sides.

Jan 30, 2015 | 2002 Ford Explorer

2 Answers

Brake lights and signal lights don't work 1994 ford explorer


If the fuses for each circuit are good and have power, the problem could be in the turn signal switch.

Aug 05, 2014 | Ford Explorer Cars & Trucks

1 Answer

1990 Ford f250 brake lights and turn signals won't work - checked all fuses, flasher and bulbs and all are good, what could problem be??


Well the brake light and turn signal circuits are on two different fuses, but they both go thru the turn signal switch.
So I would start by checking for power in and out of the turn signal switch for each circuit.

Apr 07, 2013 | 1990 Ford F250

1 Answer

TURN SIGNAL NOT WORKING IN MY FORD EXPLORER 1999


have you replaced any exterior light bulbs recently the proper bulb must be installed you should hear your flasher when you turn your signal right or left if not check fuses . if all bulbs are correct flsher works then you have to replace your turn signal switch with is a common problem on these vehicles.

Sep 10, 2012 | 1998 Ford Explorer

1 Answer

Turn signal,brake lights not working


I would check for voltage at the turn signal switch. The brake lights go thru the turn signal switch, except for the high mount light.

Jul 24, 2012 | Cars & Trucks

1 Answer

Rear brakelights and turn signals do not work


The turn signal and brake lights are controlled by the turn signal switch.
You did not mention parking lights so I will assume they work.

Could be a faulty turn signal switch or a wiring problem between the dash and the rear of the van.
Do the hazard flashers work on all four corners ?

Jun 27, 2012 | Ford Windstar Cars & Trucks

1 Answer

My brake lights won't work in my AU Ford Falcon


On vehicles that use a common bulb for signal and brake lights the brake light circuit runs through the signal switch. A problem in the signal switch can cause the brake lights not to function. Also check your Emergency flasher switch. Hope this helps.

Apr 11, 2010 | Ford F Cars & Trucks

1 Answer

Left hand interior turn signal light does not come


check for power on the multi function switch (turn signal switch) mostlikly the switch is bad

May 17, 2009 | 2001 Ford Explorer Sport

1 Answer

Signal lights and brake lights stopped working


the multifunction switch (turn signal switch) is a major cuase of this. your high mount stop lamp wire is run through the switch.

Dec 21, 2008 | 2000 Ford F150 Flareside SuperCab

Not finding what you are looking for?
2004 Ford Explorer Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...