Question about 1995 Ford Mustang

1 Answer

Gear slipping between 2nd and 3rd

I have a 95 mustang gt conv. 5.0 auto. Im using my scan tool to check for shifting problem, While driving, the car shift normally but if you hit the pedal hard, it will slip from 2nd to 3rd. However the check engine light is not on. but my scanner is not reading so I checked the fuses and its seem to be ok. I replaced the ecm with a rebuilt one and is doing the same thing. It wont communicate. Im wodering if someone here has a wiring diagram for ecm, voltage reading... this is new to me. Never encounter a problem like this one. thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Most shifting probs on the late model vehicles are caused by the shift solenoids or the vehicle speed sensors. look at that first, then figure out when you last had the trans fluid changed and the filter replaced, and the bands adjusted.

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kia sportage 05 jerking in 2nd and 3rd gear, raving the engine spontaniously, help!


SX 2.4L w/Auto Trans Slip/Jerk Shift Problem - Kia Forum

www.kia-forums.com/kia-forte...td.../55002-sx-2-4l-w-auto-trans.html

Nov 5, 2009 - 10 posts - ‎8 authors
A noticable rev in RPM between 2nd and 3rd gear only after startup. I had been ... Last edited by TeeJay1959; 11-05-2009 at 04:49 PM. TeeJay1959 is ... Started engine, accelerated out of parking lot and got a rude jerk between 2nd and 3rd gear. You are right .... 1 Attachment(s) 93-02 Kia Sportage Mud. 2nd to 3rd gear shift a "jolting" exoerience
10 posts
Jan 30, 2015
Please Help with 2006 Spectra Transmission
10 posts
Jan 31, 2012
2010 Surging while driving
10 posts
Jul 4, 2011
2005 Kia Spectra Auto Trans Problem
10 posts
Jun 18, 2005
More results from www.kia-forums.com

Kia Sportage Software Update - RepairPal


Feb 08, 2016 | Kia Cars & Trucks

1 Answer

95 Chevy 1500 with the 4l60E.wasn't driven for 5 years it won't shift out of 2nd gear,oncein 3rd gear it doesn't slip. fluid level is about 3-4 qts over. Any ideas?


Over filled trans. will foam and cause shifting problems. You can't diagnose until the fluid is at the correct level. Check both sides of the dipstick with the engine running(ideally in Drive) for best accuracy. Make sure you have a helper stepping on the brake so you don't get run over by your own truck.

Oct 16, 2015 | Cars & Trucks

1 Answer

Transmission slipping in 2nd gear


1 Ck A/T fluid level & quality
2 Scan/ck for code(s)
3 With scan tool connected,road test vehicle/Ck parameters....
....time for a pro !!

Apr 06, 2014 | GMC Sierra Cars & Trucks

1 Answer

Will not shift out of 2nd gear


Tranny most likely shot. I believe yours is a T-5, I had the same issue years back but in 3rd gear. Usually the clutch going out is a gradual thing. So I would have a tranny shop look at it. Maybe find a cheap rebuilt tranny for ya.Look online or a trusted shop.

Mar 23, 2014 | 1994 Ford Mustang

2 Answers

C-4 transmission slides between 2nd and 3rd under light acceleration


Is it over filled?

You cold try cleaning the valve body

I guess you have a modulator,is that
leaking fluid,pull of vacuum hose & check

Nov 30, 2012 | 1966 Ford Mustang

1 Answer

I just rebuilt the automatic trans in my 95 mustang 5.0 because 3rd and averdrive would not work. i put it back together and now if you can get it to a speed that shift into those gears it works fine but i...


Yes it can But Im sure by the way you talk you know a lot of what you are doing,I sure you set that at inch pounds they said.Im think it is 72 in lbs,Im just wondering if a ball slip on you in the valve body.I hope this helps you

Sep 05, 2009 | 1995 Ford Mustang

1 Answer

1998 Dodge RAM 1500 won't upshift, slips out of gear


have you dropped the pan to see whats the bands are set at, any debris in pan bottom, whats your governor pressure, if bands are ok, but gov pressures are not relative to speed 1 psi per mph up to 95-127psi, port is on pass side of case rear top right, scan tool would be very helpful, your must have mil light on for this problem, gov dtc's, replace gov transducer as gov solniod as a pair, no exceptions, also are there any 02 sensor dtc's, shorted to voltage, this wil make pcm do stupid things to trans shift, affecting gov signals. GOOD LUCK RDJRP

Jul 10, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
1995 Ford Mustang Logo

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...