Question about 2003 Dodge Intrepid

1 Answer

Not running properly

2003 Dodge Intrepid has 3 codes coming up, P0441, P0108 and P0068. Have any suggestions ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Hi
code P0068 = MAF/MAP sensorthrottle position correlation
code P0108 = MAP/BARO circuit high input
code P0441 = EVAP emission control system purge flow fault
take it infor a service
cheers Rob.

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0129 and p0108


TYPE:

OBD PO108

OBD PO129

May 12, 2014 | 2003 Dodge Intrepid

2 Answers

Hi I have a 2004 Dodge Intrepid that keeps throwing a P0068 code. I have changed the TPS sensor twice. It will run fine for a rew weeks then all of a suden when I come out to start it after not driving it...


Your sensor could not be installed properly, you could have a vacuum leak, bad map sensor, or even a Mass air flow sensor problem. Isn't technology great! make sure the TPS sensor is seated properly. check for vac leaks in your hoses under the hood. Using small amounts of ether (starting fluid) and spraying it on vacuum hoses can help you find a vacuum leak. if there's a leak, your idle will increase due to it burning the ether. Not super safe but it's worked for me. try changing the other sensors & I hope this helps ya.

Nov 09, 2013 | Cars & Trucks

1 Answer

Help.... I have purchased a 2003 Dodge Intrepid


had same car with 2.7 engine engines from dodge had a lot of issues as for as the shifting issue it is most likely the govenor solenoids inside the transmission another common problem most shops that mess with transmissions charge anywhere from 300 to 500 to fix the shifting issue

Oct 20, 2013 | 2003 Dodge Intrepid

1 Answer

Get codes p0068 and p0108


codes p0068 refer to Manifold pressure sensor/mass air flow sensor--throttle position correlation--causes ---wiring---map sensor---maf sensor--mechanical fault.
code p0108 refers to manifold absolute pressure(map) sensor/barometric pressure (BARO) sensor--high input. causes ---wiring short to positive---map sensor---baro sensor---ecm.

Mar 28, 2013 | 2002 Dodge Intrepid

1 Answer

My engine light came up with the code P0068 AND P0108. Anyone knows what wrong with my 2004 Pacifica?


p0068 TPS sensor problem,p0108 maf or baro sensor higt resistance,usually one or other has voltage problem or its desconected,you should check for voltage, disconecting one firs tand after the other one.

Nov 24, 2009 | Chrysler Pacifica Cars & Trucks

1 Answer

Chrysler intrepid 2003 obd 2 code P0441


Most common problem causing this code is the purge solenoid. A quick smoke test will show if you have any leaks in the system. If no leaks and the fuel cap is installed properly it's the purge solenoid.

Sep 16, 2009 | 2003 Dodge Intrepid

1 Answer

2002 intrepid vacuum issue p0108


CODE PO108 IS MAP SENSOR CIRCUIT HIGH INPUT.

Aug 01, 2009 | 2002 Dodge Intrepid

2 Answers

Check engine light


P0113 Intake Air Temperature Circuit High Input
  • P0123 Throttle Position Sensor/Switch A Circuit High Input
  • P0068 MAP/MAF - Throttle Position Correlation

  • P0108 Manifold Absolute Pressure/Barometric Pressure Circuit High Input
    Have u had any work done on the engine lately or anything done under the hood? looks like something in the area of the MAF sensor is disconnected or the sensor itself is disconnected, all the codes are related.
  • Jun 12, 2009 | 2004 Dodge Intrepid

    1 Answer

    Code P0441


    Code P0441 = evap code (auxiliary emissions control systems),You could try replacing the fuel cap first (make sure it has the double gasket), but most likely the charcoal canister has failed or you have a leak in a hose related to the evap system.

    May 02, 2009 | 1998 Dodge Intrepid

    2 Answers

    Diagnostic codes


    p0068 is Throttle Position sensor inconsistent with Mass Air Flow sensor.

    couldn't find the other 2.

    Jul 19, 2008 | 2003 Dodge Durango

    Not finding what you are looking for?
    2003 Dodge Intrepid Logo

    1,520 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    75051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7726 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...