How to remove driver seat armrest of ford ecosport

There is generic information only and a video, but the sequence in the graphic is correct. You need a workshop Manual when doing work like this. Some are available online.

https://www.google.com/search?q=2014+Ford+Ecosport+Titanium+1.5%2C+cylinder+head+bolt+torque

..

2015 - 2016 Ford Fusion Fuse Panel Diagram - Fuse Box

https://car-fuse.blogspot.com > 2020/10 > 2015-ford-fu...

Fuse type, Power Distribution Box - Bottom, Under the hood, Passenger Compartment, Driver's Side Fuses, Where is the Fuse Box, Engine Compartment.

Fuse Box Diagram Ford Fusion (2013-2016) - Fuse-Box.info

https://fuse-box.info > ford > ford-fusion-2013-2016-f...

2015 - Instrument panel fuse box diagram: Ford Fusion (2015) ... Heated seat. ... Ad. Assignment of the fuses in the Power distribution box (2015) ...

Videos as well

https://www.google.com/search?q=power+seat+fuse+in+2015+Ford+Fusion

..

https://www.carsguide.com.au/car-advice/q-and-a/known-problems-with-ford-ecosport-46317

https://www.carsguide.com.au/car-advice/q-and-a/known-problems-with-ford-ecosport-46317

Here are a couple of posts that talk about the ecosport.

i have a ford galaxy which is a VW sharan with a ford badge and mine will come off for repair by removing a cover and under the cover is a torx headed bolt

there are about 8 torx screws (very small) near the hinge of the lid. remove those and the lid will come to remove the entire console, there are bolts on the back of theconsole accesible from back seat, and on the side of the console. easiest way to acces those bolts would be to remove the front two seats. they are held in by two bolts in front and two nuts under plastic covers in the back. raise the emergency brake lever and the console will slide up and be removed.

It is possible that the role pin to remove the armrest is hidden inside the zipper cover. I do not know this particular vehicle, but GM did that to some of the vans. Some also have to require the removal of the actual seat and turn counterclockwise to "unwind" the armrest. Good Luck, hope this may help.

on the end of the armrest should have a cap or a zipper and inside is the screw to un do the arm

using a flat blade tool like a small flat blade screwdriver, release retaining clip on arm rest and pull armrest from seat. slip the screwdriver between seat back and armrest and pry up on the retaining clip.

Un zip the cover on the armrest and pull it up to expose the bolt hole. unbolt and remove the arm rest and see what parts are damaged, sometimes it can just be tightened.

The armrests have covers that can be removed. Locate the zipper on the arm rest. Once you unzip it pull it toward the back of the arm rest and this will expose the one bolt that hold the armrest on. You will need a large torx and rachet to get it off. Once you take out that bolt the armrest will come right off.