I can't locate he crankshaft sensor location for a 2008 Infinity G37S. Please give me a detailed area on the engine to look for it.

Hi,

it could be underneath the car or under the hood. Please acquire a picture of the part and start by checking each place. If not able to locate the image, then please call GM (i believe owner of Saturn) to ask technicians to give specific location and any associated diagrams for finding it.

Thank you.

Question edited for clarity.
Question moved to model category.

Check out the videos, and also already answered on Fixya

https://www.fixya.com/cars/t6734476-crank_sensor

https://www.google.com/search?q=2008+audi+A3+2.0+tdi.+crankshaft+sensor+location

..

yes it has a crank position sensor located in front side for engine block near bell housing area

On Most v6 Engines it is located right above the Crank Pulley...look for wires ...in that area...

Hi Rusty, There's two links below showing the position of 2005 Ford Explorer Crankshaft Position Sensor and the 2008 ford edge camshaft sensor location. It seems like they're all in the same position, I hope this helps.....CHEERS
..
2005 Ford Explorer Crankshaft Position Sensor Location

2008 ford edge camshaft sensor location

On 1997 Chrysler Sebring 2.5L MFI 6cyl...
- the PCM is located in the left side of the engine compartment, beside the Power Distribution Center (PDC).



Fig. 1: Location of the PCM on the Cirrus, Stratus, Sebring convertible and Breeze models



Fig. 2: Location of the PCM on the Sebring coupe and Avenger models

- the Crankshaft Position Sensor is located: under hood, driver side, upper engine area, mounted on end of engine block



Fig. 4: Location of the crankshaft position sensor on 2.5L engines

Hope helps; remember to rating this answer and leave some testimonial comments.

The Crankshaft Position Sensor is located under hood, center, rear engine area, mounted onpassenger side rear of cylinder head.



Fig. 2: View of the Crankshaft Position Sensor (CKP) location-2.2L engines




Fig. 3: The Crankshaft Position (CKP) sensor location-2.3L/2.4L engines


Hope this helps (remember to rate this free answer).

1990 Chevrolet Cavalier 2.2L TBI 4cyl
The Crankshaft Position Sensor is located under hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block.



Fig. 1: View of the CKP sensor-to-crankshaft reluctor relationship

Crankshaft Position (CKP) Sensor
A magnetic crankshaft sensor (Hall Effect switch) is used which is remotely mounted on the opposite side of the engine from the DIS/IC module. The sensor protrudes in to the engine block, within about 0.050 in. (1.27mm) of the crankshaft reluctor.

I really hope help you wuth this (rated this help). have a nice day, good luck.

On your 1992 Chevrolet Lumina-Sedan/Coupe 3.1L MFI OHV , the Crankshaft Position Sensor is located: Under hood, passenger side, lower engine area, passenger side of engine block, mounted front of crankshaft pulley