Question about Pontiac Montana SV6

1 Answer

Before remte starter was working,lateron it was working when go closer to van ,now its not working at all, i changed the same battery but doesnt work . what to do.plz advise .thanx pontiac montana sv6 year07

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Sounds like u need a new starter there easy enough to do. try hitting the starter with a hammer NOT THE SOLENOID which is the smaller round thing then try to see if it starts 85% of the time it will workand if it still dose not work take it to a shop and get them to do a system test before you spend alot of time and money

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 ford windstar won't start


does it have the halo around the ignition switch for anti theft? ive seen a lot of those fail and need replaced. on a side note be careful jumping the start on those vans,if the ecm doesnt start it sometimes it wont shut it off either. could be the resistor in the key too.

Jul 06, 2014 | 2001 Ford Windstar

1 Answer

Do toyota townace vans have a starter motor fuse if so where plesse thankz


Most Times Its In Line With POS Side Of Battery Cable - Oblong Whit or Gray Plastic Tube
Just To Check Run A Jumper Wire From Hot Side Of Battery to The POS Terminal Of Starter ( LEAVE KEY OFF ) If That Makes The Starter Work - Get Help Someone To Start While You Run The Wire
If No Action at All - Change Starter

Dec 11, 2013 | Cars & Trucks

1 Answer

Van doesnt click over


-Make sure it's in "Part" position.
-Check battery cable from battery to starter.
-Check ignition wire that connect to starter solenoid. (Must be good connect)

Mai

Apr 04, 2013 | 2007 Dodge Caravan

1 Answer

My van was having trouble starting. It holds the battery charge and the lights turn on but it just wont click over to start. Is my starter out or what could it possibly be?


Check your battery voltage and charging and the cable connections then unplug the ignition starter wire from the starter and try to jump the starter at the starter if it works then you have a voltage supply problem could be the ignition switch if it doesnt work that way the starter solenoid contacts are burnt you will need a starter

Dec 08, 2010 | 1994 Plymouth Voyager

2 Answers

Mercedes vito 110cdi starter motor problems. only when the van


Hi as it starts with a jump start, i would rule out a starter motor problem, i am taking it that what you mean by a jump start is your using a donor battery rather than pushing the van, so possible causes are (1) battery discharging due to a light left on, or the alarm system draining the battery or something similar, (2) alternator not charging the Battery, when you turn the ignition key does the ignition light come on, does it go off when the engine starts?

Mar 14, 2010 | 2004 Mercedes-Benz C32 AMG

1 Answer

Van wont start


Just maybe the battery and alt were good. You did test them,before replacing didn't you? How about the starter solenoid,starter or ground connections or cables with too much resistance. Do a voltage drop test, on all grounds, you can get to.

Feb 19, 2010 | 2003 Ford Windstar

3 Answers

2000 chevy venture doesnt start


check to make sure the security light is not on if it is the van will have spark but no injecter pulse the best way to solve this issue is to have the original igniton key and put it in the igniton in the run position and leave it on for 10 minutes then the light will flash then try to start the van

Jul 15, 2009 | 2001 Chevrolet Venture

1 Answer

1994 Plymouth Voyager Van


u need to raise up the van then once your underneath it u should find the starter going from the left tire to the right tire either closer to the front bumper or the firewall..most likely closer to the back of the engine by the firewall then once you find it its only a thick wire and a few bolts and it should fall out

Oct 26, 2008 | 1994 Plymouth Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...