SOURCE: how to replace our low beam headlight on 1999 town and country
1.) Open the hood of your van
2.) On the passenger side of the vehicle, look behind the headlight
enclosure. You will see a set of wires running into the back of it.
This is the power clip. Either with your hand or a flat-head
screwdriver, pop the power clip off.
3.) There is a plastic ring encasing the light bulb. Turn the
ring counter-clockwise and pull it out of the socket and set it aside.
4.) Pull firmly on the light bulb to remove it.
5.) Place the new light bulb into the same opening. Be careful
not to touch the glass part of the new bulb. The oils in your skin can
substantially reduce the life of the new bulb.
6.) Replace the plastic ring and turn it clockwise to lock it in place.
7.) Reattach the power clip to the back of the bulb.
SOURCE: Front PCV Valve on chrysler town and country
PCV valve location-2.4L engine
PCV valve location-3.3L and 3.8L engines
SOURCE: What size belt do you need to bypass the a/c
You have to purchase an air conditioner compressor delete kit. Any belt you try to put on will not work duse to the routing. The kit comes with a bracket an idler pulley and a new belt with all nessessary hardware to install they run about $100.00
SOURCE: fuel filter on a 1999 chrysler town and country
I belive the filter is in the fuel tank, its an integeral part of the pump/pickup assembly
122 views
Usually answered in minutes!
×