1994 jeep grand cherokee. i just purchased this jeep and just had it looked at at a shop and everything, lately when i first turn it on it wont start, it wont even make that noise like the engine trying to turn, after a couple tries, it comes on and starts but the jeep is shaking very hard, the more i continue the drive the more the shaking stops, but this worries me especially after having it looked at by two diff places!! i was told to put fuel injector/cleaner in the gas tank and did so but its still doing this, any idea what else it could be??

warrenty????return it

If the check engine light does not light up, on the dash, before trying to start the jeep then the computer ecu may be in need of repair. If the check light does come on before cranking, then it might be on of a number of sensors that has gone bad.

Contact the dealership and purchase the rear differential additive, this product assists the limited slip diff in opperating correctly. once purchased simply ad to the rear differential. it only takes about 250ml

maybe front pump going bad take to transmission shop have looked at

It seems as though one of your front drive axle universals has failed and locked up. The other possibility would be a dry steering knuckle. Thank you, Dana

Look for main fuse OR fusable link inline (in the main wire) to fuse box

Well My 94 Jeep Grand Cherokee had the same problem and we had to just cut into the lift gate panel from the inside. It required cutting plastic but with a 94 looks arent everything and a working lift gate was worth it. But then we pealed back this black plastic mat under the panel and lifted up on the release bar(verticle bar that lifts the latch) and once we got it open we adjusted a little clamp that had slipped. Dont adjust it too much or when u lock it it wont lock! But sorry i dont know the name of the parts. But then u can screw the panel back in and it wont look to bad besides some cuts.

Need more info. Does it turn over and not start? Does it not turn over? Have you tried to jump start it?

Just call the part stores and dealership head quarter the dealers ususally wont give you that info, also junk yards will help you out a lot also.

tepfy

Check to see if you have inadvertantly hit the push switch on the rear dome lite. Click it once and try
your lites again..I had this happen on my 93 jeep and that was the problem.