Question about 2001 Jaguar S-Type

2 Answers

Window mechanisim not working

I have the same problem. I can't figure out how to get interior door panel off front passenger door. 2001 jaguar S-type

Posted by on

  • yadayada
    yadayada May 11, 2010

    same problem as what, don't do this kind of post we have no idea what you are refering to.



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

Locate the clips and use two knifes on both sides of clips then pull, begin on the bottom of the door and work uppwards. sorry bad english:) At the top its often a srew in the doorhandle.when loosen all clips and screws push the panel up and towords you

Posted on Aug 30, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

We all have the same problem. I haven't got real far into fixing it, but I have removed the panel. I'm not sure if it is the proper way to remove it, and I have broken some screws that keep it attached to the door...oops. I seem to be removing some body parts by force. That's basically what I do. I actually went to a junk yard and took some of the screws from the broken down S-Type, put them in my pocket and left. Hope this helps you in some way.

Posted on Aug 29, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Front Passenger door lock stuck

Hi Andrew:
Many local tow truck operators know how the latches work and use a tool called a slim jim to trip the latch.

If you really want to give it a go yourself, I'd remove the interior panel on the drivers door so that I could see exactly how the mechanism worked. Using that knowledge, you'll have to practice using a skinny tool, wire, whatever works, to unlatch the drivers door.

Once you've got it figured out, apply the mirror image of that process to the passenger door.

When you achieve success, you will be well on the way to becoming a tow truck driver. (or a car thief)

Happy Happy!

Jun 22, 2015 | 1999 Toyota Sienna

1 Answer

How do i replace passenger side glass on both doors

Remove interior door panels and unbolt the window mechanisms. It should be obvous once you ahve the panels off. Study online how to reove the door panels.

Feb 04, 2014 | 2002 Buick LeSabre

1 Answer

1996 cadillac deville how to replace passenger front door glass

remove interior door panel inside you will see where it mounts to should be two to three bolts and possible a clip that holds it in place remove old glass and install new glass from top of door remount into window gear mechanisim

May 20, 2013 | Cars & Trucks

1 Answer

I have a 2001 Chevy Express 3500 15 passenger van. A few months ago the power windows started going out, as in the would not work but if I opened the driver door just right it would work. Now they have...

The usual source for the window problem is the wiring between the inside front door and the kick panel where the wires run in a harness and are usually rubber booted. Everytime the door opens and closes the wires are bent back and forth and they break.

Aug 06, 2011 | 2001 Chevrolet Express

1 Answer

The front passenger door window has fallen down. How do I take off the interior door panel?

after removing all visible screws on the door panel, the window crank(if equipped) and likely the door handle; the panels just snap/pop off and on.

Dec 28, 2009 | 2001 Nissan Quest

1 Answer

1988 jaguar and cannot open doors from outside

need to remove the interior door panels and check all the linkages. One of them is a brittle plastic linkage that is famous for breaking, and bits get caught up in the travel path of the door handle. I had taht issue, and rebult all mine with aftermarket plastic linkages, and the metal parts I pulled from junkyard cars. No way to fix it without removing the interior door panels, but that is thankfully a pretty easy job.

Mar 06, 2009 | 2002 Jaguar X-Type

1 Answer

2001 Ford Expedition window came off track

You did not mention whether it was a front or rear door? I assume its a front because u stated no screws.

Here are instructions for front door:

Remove the plastic trim from behind mirror(just snaps on).
Remove the window switch panel(just snaps on).
Remove the screw behind the mirror cover.
Remove the screw behind the window switch panel.
Remove the courtesy lamp lens.
Remove the screw in the courtesy lamp housing.
Remove the inside door handle trim cover.
Remove the inside door handle bolt.
Lift upward and then outward to remove the front door trim panel

Feb 10, 2009 | 2001 Ford Expedition

1 Answer

Interior lights won't turn off 1999 BuicK LeSabre.

yes there is a relay switch in engine compartment or under dash

Jan 25, 2009 | 2001 Buick LeSabre

Not finding what you are looking for?
2001 Jaguar S-Type Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76630 Answers


Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides