Question about 1995 Honda Accord

2 Answers

I have a leak and the oil is leaking very bad but its not the oil pan. What is it? its a o shaped ring by the engine and it is broke could it have something to do wit it because the oil seems to be coming from ther

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Yes change it.Its an oil seal and thats where your oil is leaking

Posted on Jul 19, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 227 Answers

I dont know much about your car. However from your discription it sounds like your oil filter came off. If there is a threaded piece in the center of the ring and several small holes around the inside then that is where the oil filter goes. Good Luck!

Posted on Jul 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Oil leak on a '92 Geo Tracker. Installed an O Ring, but still leaking. Any suggestions?


O-ring where? The drain plug? Distributor shaft? Or do you mean oil seal?
Geo oil drain plug specifies a compressible copper ring washer I think? Need to clean the surfaces well, and torque to spec. My own plug's seal is not perfect, but only a drop here and there usually. Autozone or NAPA can supply you a new plug and washer if needed.

Apr 19, 2015 | 1992 Geo Tracker

3 Answers

Engine is making oil


An engine does not make oil, but it can spill the oil that should be inside. You could have an oil leak, which means that oil will be leaking from either the front or the rear oil seal. The front oil seal is just behind the crank pulley, the one that drives the fan / alternator belt. If oil is leaking from there, suspect the front seal.
If you have oil leaking from the bell housing, that the the bell shaped metal thingy between the engine and the gearbox. you can suspect the rear oil seal.
If you inspect the engine and see oil leaking from the oil pan under the engine, you have a leaking pan gasket. This can usually be solved by tightening the pan bolts, a whole lot of bolts underneath the engine.
Finally, and this is probably the worst, if you see oil around the breather pipe that goes from the valve cover on top of the engine to the gas intake system, you have leaking compression, that means either the valve stem seals are leaking or the compression rings are finished, and you will have to have the engine overhauled, or at the very least have the cylinder head overhauled.
If the rings are suspect, you will also have excessive smoke out of the exhaust when you drive, especially when you accelerate. Check the exhaust for signs of wet oil.

Mar 18, 2015 | Cars & Trucks

1 Answer

I have 1994 geo tracker, i have to replace oil pan as it is corroded and leaking oil. Do i have to pull the engine out to remove oil pan or is there another way to do tjhis?


there are 2 ways, and both are here.
pull engine
pull axle
it;s your choice, and covered here and the factory service book too.
depends on tools, (lift?)

way 1
http://www.fixkick.com/axles/Pan-drop/pandrop.html

way 2: (factory way)]
here is the pull page. engine
and last link there is to fsm page on same.

happy trails.
PS
99% of leaking pans, are NOT.
it is :
1: valve cover leaks, (not doing 60k service and not putting in new VC)
2: cam seal leaks.
3: crank seal leaks.
4: the infamous, dizzy 2 o-ring leaks.
5: and doing head rebuild, they forget to read the page on how
to seal the rear cam cap. and bam, it leaks, the FSM covers that.
i can tell you which page.\
and gravity does the rest with help from mr. wind.

if the pan is only rusty, hit it with phosperic acid (ask) and then paint it on car. the PAN is RTV glued to the engine are never leak. (almost)
and are real hard to get them resealed , leak free. so makes sure
it really does leak.

Feb 10, 2014 | 1994 Geo Tracker

1 Answer

1992 cadillac deville leaking oil at dipstick


I would look for other leaks. If you are sure it's leaking at the dipstick tube, there is normally an o-ring where the tube presses into the engine. In general, this is an odd place for a leak, as ther eshould be no oil pressure in the pan (where the tube terminates) and unless the engine is overfilled with oil, the tube end shouldn't be immersed in oil to leak. IF there is pressure in the oil pan, that generally indicates bad rings. I have seen engines where the oil dipstick actually pops out of the tube under pressure when the engine is running due to pressure in the oil pan from blow-by at the rings.

Jan 05, 2014 | 1992 Cadillac DeVille

1 Answer

Major oil leak....looked like it was leaking from oil pan but is not


Have the engine steam cleaned (watch any electronics) Run the engine & start looking from the top, down. It may be a bad valve cover leak from the rear of the cover or ck the front & rear seals. (cracked head, block etc. It could be many places

Oct 14, 2017 | 1994 Chrysler LeBaron

1 Answer

Burn oil after a long trip


engine burning oil could have worn piston rings.worn valve stem seals or engine oil return holes stopped up.could have faulty pcv valve.make sure pcv getting vacuum remove pcv while engine running should feel vacuum if not pcv faulty or pcv vacuum hose disconnect or broken.check where you park your vechicle if you see oil spots engine has leaking pan gasket,valve cover gaskets could be leaking oil and the front crankshaft seal or rear main seal could be leaking oil.check make sure oil filter hand tight and check oil pan drain plug make sure its tight.

Dec 28, 2012 | 1998 Ford Windstar

3 Answers

Newly overhauled toyota corolla 2e engine emits black smoke


I have toyota corona 3s engine it smokes black and fuel consuption is high we have changed the engine oil and cylinderhead gassecate but still black smoke is comming what should i do

Jan 21, 2009 | 1989 Toyota Corolla 2 Door

2 Answers

2000 Engine oil leak


most likely front cover o-ring. there is a small $4 dollar o ring behind the front engine cover, that leaks. Pretty common problem on your car.

Jul 22, 2008 | 2000 Nissan Altima

Not finding what you are looking for?
1995 Honda Accord Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...