- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi: If this is your 1st time to Change your Spark Plugs, I recommend that you First of All Get the Correct Spark Plugs from your Auto Parts Store, Then Locate your Spark Plug Wires which run from your Distributor Cap to your Spark Plugs.If you have a V-8 There will be 8 if you Have a V-6 Then You'll have six Spark Plug Wires and 1- COIL Wire which is located in the Center of your Distributor Cap to your Coil. It is the Shortes Wire.I Recommend you ONLY do 1-Spark Plug at a Time, This will Prevent you from getting any of your wires Crossed which will Cause your Engine to Run Rough ,Back Fire or Not even Start,So just Pull off 1-Wire From Spark Plug and one Wire From Your Distributor Cap, You'll Need a Spark Plug Socket Probally 5/8th in. And a Ratchet and 2- Different Size Extensions to beable to reackh all your Spark PlugsNOTE!! Buy you a Spark Plug Wire Tool there not very Expensive but well worth it,This was you Can Pull the Wires with out Damaging Your Wires.And you Might Want to Put NEW Spark Plug Wires On as well, If So and I do Recommend This. And Again Just do 1- Wire and Plug At a Time So you'll know you Have Not Crossed any Wires. Hope This Helps You ,Please Respond by Voting on This Problem And How it Helped You. Thanks From WYOCWBOY
The spark plug #6 is located on the cylinder head that is closest to the radiator and it is the one closest to the driver-side.Hope this helps,if you need anything else,let me know. Thanks,Chuck
FIRST OF ALL YOU HAVE CHANGE SPARK PLUGS WHEN ENGINE IS COOL.IF YOU CHANGE THEM WHILE ENGINE IS HOT YOU COULD DAMAGE THE ALUMINUM HEADS OR CAUSE DISTORTION.TO CHANGE SPARK PLUGS YOU NEED A SPARK PLUG SOCKET.A TORQUE WRENCH.ITS NOT MANDATORY.BUT IT WILL KEEP YOU FROM OVER TIGHTEN SPARK PLUGS.YOU NEED A 3/8 RATCHET AND EXTENSION.YOU ALSO NEED A SPARK PLUG GAP GAUGE.AND SPARK PLUG BOOT PULLER.YOU ALSO NEED SOME ANTI SEIZE COMPOUND.TO PREVENT DAMAGE THREADS WHEN INSTALLING THE SPARK PLUGS.
You didn't specify whether you have the (4) cylinder or the (6) cylinder engine.....
I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same.
To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine:
Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way.
Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed.
Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right.
Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place.
To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place.
Repeat same procedures for spark plugs number (3) and (4).
Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold