Question about Mercedes-Benz Mercedes Benz Pedal Car By Charm Company
The remote control must be reset if the vehicle does not unlock.
- If the vehicle is locked, open the driver's door with the mechanical key in your remote control.
- Press the unlock button on the remote control.
- Insert the key into the ignition lock and turn one position to turn the ignition on (lights register but don't start engine)
- Turn the key back to the original position to turn the ignition off again.
If still the same then other reason for this may be
The motor for the unlock button must be bad. Or the cable is not connect properly.
Also chreck out the key fob battery is it proper or got faulty.
If still the same then try this before buying new fob
Take the fob apart and clean the contacts, they get what looks like grease on them and can be wiped off with a paper towel or napkin .clean all the stick material internally on the contacts.and then again connect the fob properly and then try.if still the same problem then it needs to be replaced.
Please do rate the solution. Thank you for using fixya.keep updated. thanks
Posted on Jul 19, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 22, 2016 | 2008 Volvo XC90
Jan 08, 2015 | 2008 Ford Focus 2.0
Apr 14, 2013 | 2004 Dodge Ram 1500
Oct 31, 2012 | Cars & Trucks
Oct 21, 2012 | 1997 Nissan Quest
Feb 23, 2012 | 2003 Ford Focus
Aug 17, 2011 | 2003 Chevrolet Monte Carlo
May 23, 2011 | 2005 Nissan Murano
Jul 07, 2009 | 2008 Dodge Grand Caravan
Oct 02, 2009 | Mercedes-Benz Mercedes Benz Pedal Car By...
143 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: