Question about Saturn SL

1 Answer

How to remove the fusebox cover on a 1996 saturn. I have removed the 10mm screw, but it still won't come off?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

You have to push the clips open that hold the plastic casings together.

Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace headlight on 2009 saturn


  • saturn aura replace headlight bulb with bumper on!
    [img src="https://i.ytimg.com/i/QnvVxud6_7t7W6Rm2ABgnA/1.jpg" alt=" [a href="https://www.youtube.com/channel/UCQnvVxud6_7t7W6Rm2ABgnA"]execlon's channel
    44 50,720
    • Start at:
    Published on Mar 8, 2013
    Remove 5 -10mm bolts 4 on plastic cover under hood 1 on air cleaner hose.
    Remove 2- clips with flat head on plastic cover under hood
    Remove 6 7mm screws (headlight brackets)
    Lift up and over hood latch the center cover plastic
    Pull inner side of headlight outwards and outter side towards middile of car and out.
    Its hard but you can get it to pop over the corner of fender. I did it all in around 15 minutes
    Dont give up it can be done! sorry about not having more video my hands were busy at the end.










    Dec 14, 2014 | 2009 Saturn Aura

    1 Answer

    Changing headlight bulb


    remove 7mm bolts holding hd light , remove the five 10mm bolts,two clips and two philips hd screws on cover between hd light . then on bottom in front of front tire remove all plastic tabs and screws on wheel well lining . now you can get to a single 10mm bolt holding the hd light. hd light is ready to be removed.

    Jul 12, 2013 | 2008 Saturn Aura

    2 Answers

    Need to find fuse box on a1993 saturn sc1


    there is one fusebox under the hood in the engine compartment next to the battery and then theres one inside the car in the center of console, heres a diagram to help you locate the inside fuse box and also the fuse locations, the underhood fusebox will have a label with fuse locations on the cover. good day.johnjohn2_142.gifjohnjohn2_143.gif

    Aug 17, 2011 | 1993 Saturn SL1

    1 Answer

    Removing driver door panel 1996 Saturn SL2


    There are two plastic slide pins that are on the door knob itself. These need to be pushed out while holding the handle up. Make sure you don't lose them since you will need them to put the panel back on. The other thing that is needed is to take the torx screws out of the door on the bottom and around the door (inside part of panel). Be careful not to break the plastic on the panel since there are clips that goes on the plastic panel; however, if they do break, just use J-B Weld, the quick dry, to fix them.Get some never seize at Advance Auto to place on the threads of the torx bolts so they will never stick again.The mirror will also, need to come off which requires a 10mm deep swell socket, there are usually 3 bolts for that. To access those bolts, take a screwdriver and pry off the plastic cover...it is on with clips.

    Jan 21, 2010 | 1996 Saturn SL

    1 Answer

    How do you gain access to replace the belt tensioner on a 1996 saturn


    You need to take the passenger side wheel off and pull the plastic covers off that side which a screw driver and wire cutter pliers assist real well, but don't cut through with the wire cutters. Only clamp down with them far enough to pry. Then you will need a 15mm wrench to undo the belt. Keep track of how the belt goes back; however, there should be a diagram on the radiator cover to assist. There are 2 10mm bolts that will need to be removed on the tensioner. The 15mm bolt should be used again since the new ones usually are too long to get back on unless you grind off some threads, about 3 to be exact. Use anit-seize on the threads that can be purchased at Advance Auto. This will make the bolts easier to get off in the future, and if you keep the car long enough, there will be a future. Hope this helps.

    Jan 15, 2010 | 1996 Saturn SL

    1 Answer

    Front bumper cover removal


    Those may have clips on the front, near/under the grille assy. You need to remove those, and approx 3-4 10mm screws. In the front wheel well, pull back the inner liner, and another 10mm screw is right near the front, remove that too. Once that's done, you should be able to pull the corner piece away just slightly and remove another 10mm screw.

    Aug 07, 2009 | 2005 Honda Accord

    2 Answers

    Horn consantly sounds


    check the relay it may be sticking

    May 15, 2009 | 1996 Saturn SC

    1 Answer

    Replace driver side mirror


    Remove The Left Trim panel(One Screw Phillips) Remove the remote wand from trim panel you will need an allen wrench.Then Remove 3 10mm retaining nuts.Remove mirror.

    May 09, 2009 | 1995 Saturn Sc

    1 Answer

    Need to repace passenger side mirror on 1996 Saturn SL1


    Pop the plastic cover from the inside with a flat head screwdriver. You'll see 3 10mm bolts. You figure out the rest.

    Apr 05, 2009 | 1996 Saturn SL

    2 Answers

    Replaceing coil pack on 1996 saturn sl1


    looking at the motor follow the plug wires down to the coil pack located lower middle of engine.take wires of making note were they are posistioned unplug electrical connection should be 3 bolts 10mm. heads.then remove

    Jan 25, 2009 | 1996 Saturn SL

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    98 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts

    yadayada
    yadayada

    Level 3 Expert

    75051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7726 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...