Question about 2004 Mazda RX-8

2 Answers

MAZDA RX8 2004 Took it out of garage , then put it

MAZDA RX8 2004 Took it out of garage , ten minutes later put it back in ,next day it cranks but wont start ! any ideas, thanks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Check to see if you are getting fuel to the engine.If not replace the pump relay.Then change the pump if still not working.Check for spark at the wires if you have no spark then change the crank sansor.If still no spark then change the coil pack.

Posted on Jul 19, 2009

  • staffordmazd Apr 14, 2011

    Its more likely to be badly flooded. They don't like short start ups.
    Fully charge the battery. remove plugs and purge engine. dry out plugs and refit.
    It may take a long time to clear out system and easy start is useful. Once started
    they are usually ok.

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Rx8s also have an anti flood sit-up hold gas pedal whole way to the floor then try starting I have the same problem with mine when it's cold

Posted on Jan 11, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was driving my car pulled into the garage came back out the next day wont start, it cranks but thats it?????


Engine cranks - battery and starter ok. Check for fuel flow. I have seen fuel pumps go out like shutting off a light switch. Shut the car off and just 10 minutes later car will not start because fuel pump failed.

Jul 12, 2012 | 1998 Dodge Stratus

1 Answer

I have a 91 626 mazda, timeing belt broke and the water pump was leaking...so i left it in the garage,the car was not worked on unitl ten months later,i changed the timeing belt and water pump,also new...


Check the ECM for codes. Cam or crank sensors will cause a no start. Also there should have been a compression and/or leak down test performed on the engine before the belt was replaced. This is done to make sure that the pistons didn't bend the valves. Bent valves will cause a nostart because of no compression. First check for codes then do a compression test before you replace anything. Let me know
Randy

May 07, 2011 | 1991 Mazda 626

1 Answer

I have a 93 Dodge Colt 1.5 liter engine. I've noticed in the last month or so after it starts that the idle seems to go high and take 15 or 20 seconds to get back down to normal. Two days ago I went to the...


Its probably your computer. Had the same thing happen to me about ten years back. About 500 dollars. better off finding one on ebay or at a junk yard.

Aug 09, 2010 | 1993 Dodge Colt

1 Answer

My car is a 93' Mx-6. I shut it off one, tried to


my mx6 died on me one day,same thing it would keep cranking but would not fire and start towed to a garage spark tested.NO spark changed distributor and problem fixed

Apr 03, 2010 | 1994 Mazda MX-6

2 Answers

2000 Blazer Cranks, Won't Start


First of all, a diagnostic wont tell them that there is arcing involved. I am thinking it is your crank sensor. It expands and retracts in different weather situations.It should make contact in all weather situations.

Feb 12, 2010 | 2000 Chevrolet Blazer

2 Answers

THE ENGINE CUT OFF CRANKED ONE TIME THEN SHUT


Sounds like your fuel pump is going bad. Have your mechanic do a pressure test on it.

Nov 06, 2009 | 1988 Mazda B2200

1 Answer

My new 94 mazda 626 2.0 is very hard starting


tap on the gas a couple of times then try to start it.

Apr 28, 2009 | 1994 Mazda 626

1 Answer

Mazda 6 airbag passenger seat occupancy sensor


Hey,
you can install an simulator (Airbagmodul) from www.airbagmodul.com
This is a perfect and cheap solution if you dont want to spend about 1000€ in the garage.

Apr 20, 2009 | 2003 Mazda Mazda6

1 Answer

Van Wont Start Then Start's


please explain what you are calling a crank cap?? is it the magnetic pick up sensor on the flywheel if so either clean the connections in the multiplug or try putting the old one back on

Apr 05, 2009 | 2001 Chrysler Voyager

Not finding what you are looking for?
2004 Mazda RX-8 Logo

639 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...