SOURCE: problem with my 2000 pontiac sunfire
sounds like the clutch disc on a/c compressor,rubbing on bearing/pulley. replace pulley and disc should solve your problem
SOURCE: need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
SOURCE: 98 pontiac sunfire starts then in a second shuts off
first of all lights on dashbord should come on no matter security or pass key deterant is in .better check "ignition switch".
SOURCE: problem with theft system on pontiac sunfire 1997,
se encendio la luz de theft sistrem y no se aue hacer
SOURCE: REPLACE SERPENTINE BELT ON 1997 PONTIAC SUNFIRE
The auto parts stroe where you buy your serpentine belt can show you how it is replaced, if they want to...
There is an idler pully on the end of a spring-loaded arm that keeps the belt tight. You have to attach a socket wrench to the bolt at the center of the idler pully and rotate the spring-loaded arm away formt he belt to relieve the belt tension. It takes some strength tot do that so the socket wrecnh should be long enough to have more leverage, making the task easier.
Take a picture of the belt routing so you can install the new one the same way. Often the belt routing is shown on a small diagram under the hood, too.
165 views
Usually answered in minutes!
×