Question about 2006 Jeep Liberty

1 Answer

Left front turn signal lens cracked.

How do I remove the front turn signal to replace the bulb/lens.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 17,970 Answers

Check this info KJ-2002-Liberty-Service-Manual-PDF-Secc-08-Electrical-Systems ( 8L-1 page 165 and next) about headlight remove instructions.

Good luck!!!

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 windstar driver side turn signal not working left rear flashes fast


computer glitch do not know if you got last answer so here we go again

You have a right front or rear turn signal/parking light bulb blown.

turn on flashers it might help locate which one .
Remove the lens cover push and twist to remove blown bulb
replace with 1157 2 element bulb
install reverse order
Hope this helps Mike

Jan 18, 2016 | Cars & Trucks

1 Answer

Pop off front lens jeep 2009 patriot


You guys are all very close but check this, on the Patriot you can't take the lens or housing out from the front. It has to be removed from the back. And in saying that, you don't have to remove the housing at all. The steps are as follows, #1) Remove the inner fender well cover. It's the black plastic covering that hides all the wiring and the engine compartment. There are 7 push screw retainers to remove and 3 philips screws. #2) Once the cover is removed, all you need do is reach your hand in behind the turn signal and twist the bulb and it's socket to the left to remove from the housing. #3) Now that you have the light and socket out, you are just left with pulling out the red clip on the socket and pinching the black tab while you pull out the bulb. It's just that simple. Now if your housing is cracked or blemished and you have to completely remove it, then you will need to remove 3 torx bit screws that attach it to the front fender. They go in from the back of the housing. And yes, they are T20's. I don't necessarily call this dismantling the whole front end. But it's not a 5 mins job either.

Jun 28, 2013 | 2009 Jeep Patriot

1 Answer

I have a 1993 Ford Escort Wagon tht has had it's front bumper and turn signal light housings destroyed. I was wondering how hard it will be to replace them myself and besides the obvious item what else...


Check this procedure for Signal and Marker Lights...


REMOVAL & INSTALLATION
Front Turn Signal and Parking Lights
1991-96 models
(see Figures 1, 2, 3 and 4)
  1. Remove the lens upper retaining screw and the fender side retaining screw.
  2. Slide the lens assembly forward until access to the rear is possible.
  3. If necessary, unplug the bulb electrical connection.
  4. Turn the bulb socket assembly counterclockwise and remove it from the lens.
  5. Depress and twist the bulb approximately 1 / 8 turn counterclockwise, then remove it from the socket.
zjlimited_722.jpg

Fig. 1: Remove the lens upper retaining screw and the fender side retaining screw

zjlimited_723.jpg

Fig. 2: If necessary, unplug the bulb's electrical connection

zjlimited_724.jpg

Fig. 3: Turn the bulb socket assembly counterclockwise and remove it from the lens

zjlimited_725.jpg

Fig. 4: Remove the bulb from the socket



To install:

  1. Align the bulb's locating pins, then install the bulb in the socket.
  2. Attach the socket to the lens and turn it clockwise to engage it.
  3. If removed, attach the bulb electrical connection.
  4. Place the lens into position, then tighten the fender side and upper retaining screws.

Hope this helps.

Feb 18, 2011 | 1993 Ford Escort 4 Door

1 Answer

I have a pristine 2001 A4 1.8T Quattro. How do I change the front left fender turn signal bulb ? Thx....


Side-mounted turn signals, removing:
1. Press side turn signal lens against retaining tab in direction of arrow and carefully remove from fender opening.
2. Carefully pull housing "2" out of rubber socket "1".
3. Bulb "3" can be pulled out of rubber socket "1" for replacement.

70969a5.jpg
Installing:
1. Install in reverse order to removal.

Oct 13, 2010 | 2001 Audi A4

1 Answer

How do I replace the passenger side corner light and front side turn signal light?


Front Turn Signal & Parking Lights


7ccc73e.gif
Remove the 2 parking light housing retaining screws ...


9898a80.gif
... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull


a323ae9.gif
Push the bulb in the socket gently and turn clockwise, then pull the bulb out of the socket. Note the offset retaining ears on each side of the bulb


  1. Remove the screws from the lens and separate the lens from the headlight bezel.
  2. Remove the headlight bezel.
  3. Remove the screws from the turn signal housing and pull it out.
  4. Turn the bulb socket counterclockwise 1/3 turn and remove it.
  5. Installation is the reverse of removal.


Side Marker Lights
  1. Remove the screws from the marker lens and separate the lens from the headlight bezel.
  2. Pull the bulb from its socket in the back of the lens.
  3. Installation is the reverse of removal.

Feb 14, 2010 | 1997 Jeep Grand Cherokee

1 Answer

I have a left front clearance light out how do you get it out 1


Signal and Marker Lights REMOVAL & INSTALLATION Front Turn Signal and Parking Lights
  1. Disconnect the negative battery cable.
  2. At the rear of the front bumper, turn the bulb socket 1⁄4 turn and remove the socket from the parking brake housing.
  3. Remove the bulb from the socket; if necessary, replace the bulb.
  4. If lens replacement is necessary, remove the retaining bolts and remove the lens from the bumper.
  5. To install, reverse the removal procedures. Check the turn signal/parking light operations.
Fig. 1: Common front turn signal/parking light mounting

d16c14b.jpg
Fig. 2: Twist and remove the bulb socket from the back of the turn signal/parking light lens

8b774bd.jpg
Fig. 3: If lens removal is necessary, loosen and remove the retaining bolts

09f4811.jpg

Jul 24, 2009 | 1992 GMC Sonoma

1 Answer

How do you change a front side light bulb


Turn Signal/Marker Light REMOVAL & INSTALLATION
  1. Remove the one retaining screw from the upper corner of the lens.
  2. Tape the end of a pry tool, then carefully extract from the bottom of the lens in a rocking motion till the stud is loosened from the retainer.
  3. NOTE: Do not pry from the back of the lens, this will crack the lens or damage the paint.
  4. Pull the lens assembly straight out from the body towards the front of the vehicle.
  5. Twist and remove the wiring from the back of the lens.
  6. Twist the bulb and remove it from the socket.
Fig. 5: Once the bulb is removed, inspect the socket for corrosion 90916p10.jpg
To install:
  • Before installing a light bulb into the socket, ensure that all electrical contact surfaces are free of corrosion or dirt. NOTE: Before installing the light bulb, note the positions of the two retaining pins on the bulb. They will likely be at different heights on the bulb, to ensure that the bulb is installed correctly. If, when installing the bulb, it does not turn easily, do not force it. Remove the bulb and rotate it 180 degrees from its former position, then reinsert it into the bulb socket.
  • Insert the light bulb into the socket and, while depressing the bulb, twist it 1/8 turn clockwise until the two pins on the light bulb are properly engaged in the socket.
  • To ensure that the replacement bulb functions properly, activate the applicable switch to illuminate the bulb which was just replaced. If the replacement light bulb does not illuminate, either it too is faulty or there is a problem in the bulb circuit or switch. Correct if necessary.
  • Install the socket and bulb assembly into the rear of the lens housing; otherwise, install the lens over the bulb.
  • Insert and secure the lens assembly into the body of the vehicle.
  • Jun 25, 2009 | 1991 Toyota Previa

    1 Answer

    2000 sunbird front turn signal bulb


    only i could replace mine where to remove clips from the black wheel well cover then the light bulb un screws from the back of the lens

    Apr 07, 2009 | 2000 Pontiac Sunfire

    1 Answer

    How to access front turn signal for replacement


    Here you go, removal & installation of:

    Front Parking/Turn Signal Lights:
    • Remove the screws from the the lens and separate the lens from the bezel
    • Remove the screws from the turn signal housing and pull it out
    • Turn the bulb socket CCW 1/3 turn and remove it
    • Installation is the reverse of this procedure
    Side (Front) Marker Lights:
    • Remove the screws from the marker lens
    • Separate the lens from the headlight
    • Pull the bulb from the back of the lens
    • Installation is the reverse of this procedure
    Hope this helps

    Mike

    Jul 06, 2008 | 1995 Jeep Grand Cherokee

    Not finding what you are looking for?
    2006 Jeep Liberty Logo

    429 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jeep Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8172 Answers

    Are you a Jeep Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...