Question about 1991 Chevrolet S-10 Blazer

1 Answer

Put back on a in tank fuel pump of a 1991 chevy s10 blazer

I have a new gas tank and i took off the old fuel pump and replaced some of the old parts and now I don't know how to put it on the new tank. The old tank was rusted and I had a hard time taking it off and i ended up destroying the old ring and yes i have a new ring and a rubber ring. I just would like a step by step walk through on how to put it on the new tank. Thank you and tell me if I need to put more information on the problem.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 34 Answers

The rubber ring goes between the tank and the pump/sending unit flange. There should be a nothc on the tank and a corresponding tab on the flange of the pump unit, to ensure correct orientation. Set the lock ring over the flange, and tap in clockwise with a NON_SPARKING drift. The ring will cam lock into place.

Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Were is the fuel pump for a 2004 chevy blazer


Hi, TRhe fuel pump is located in the gas tank. Please see the attached for the specifics relating to your vehicle:

http://www.ehow.com/how_7671539_replace-pump-2004-s10-blazer.html

Good Luck!

Jan 09, 2011 | 2004 Chevrolet Blazer

1 Answer

Where is the fuel pump fuse on a chevy s10 blazer?


Its in side the gas tank On the top of it You have to drop the tank to replace it Make sure it;s the pump first because its not easy to do And you probley will need other parts in addition to the pump to repair this TANK STRAPS FUEL LINES AND THE TANK IT SELF MAY NEED REPAIRS DO TO HOLES RUSTED IN THE TOP OF IT

Oct 29, 2010 | 1992 Chevrolet S-10 Blazer

1 Answer

Will turn over but not start put a new fuel pump in it if you poor gas in to the throttle body it will start for a min until gas runs out


I had the same problem with my old 1987 Chevy blazer s10. The problem was the ground wire of the fuel tank was rusty and it broke. So simple was the problem. But before that, I checked and change the fuses, the fuel filter, the oil pressure switch (this is related to the fuel pump to) and finely when a was ganging the fuel pump saw that the ground wire was broken or damage.


I hope this can help you.

Aug 29, 2010 | 1987 Chevrolet S-10 Pickup

2 Answers

How do i get to the fuel pump on a 1997 s10 blazer


Unless there is an access panel inside the vehicle above the fuel pump, you will have to remove the fuel tank in order to access the pump. Do not forget to replace the fuel filter. Partially clogged fuel filter is one of the causes of a failed fuel pump.

Oct 10, 2009 | 1997 Chevrolet Blazer

1 Answer

91 Chevy Blazer gas tank needs cleaning.


the only thing i can help you with is the replacement. go to a big scrap yard, give them your measurements, and they will find a gas tank for you. my gas tank was about $100 and my friend put it in for free so i cant help you there.

Jun 24, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

Chevy Blazer won't start; fuel pump needs replacing


Before spending several hundres on a fuel pump, I recommend doing a fuel pressure test. You can get a test gauge pretty cheap at a parts store. If the pump is junk, you raise the truck, lower the fuel tank, unplug the electronics from the pump at the top of the tank, then with a hammer and flat head scrwedrive, gently tap the lock ring in a counter clockwise direction until it pops off. Pull the pump assembly out and install the new one. Reverse directions to install.

Jun 02, 2009 | 2001 Chevrolet Blazer

1 Answer

1991 chevy s10 blazer


Check the fuse under the dash. Did you replace the inline fuel filter? If not, you could loosen the line going into the filter then turn the key to the on position. The pump should run for about 2 seconds then the relay should kick off. Turn off the key for approx. 5 seconds then cycle key back on and the pump should cycle again. If you get a 2 second burst of fuel each time then the pump is cycling. Install a new fuel filter and check the grounded wire by the tank. Hope this helps. :)

Nov 03, 2008 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...