Can not get gear shifter to move from parking

If the shift handle moves extremely freely (more than normal), changes are that the shift cable has become disconnected from the shift lever. This would explain the indicator not moving out of neutral.
You will need to access the shift lever by removing the console cover. Once you access the shifter check the cable connection to the level. If the cable is broken, it will need replacement. If the cable clip has broken or fallen off, it will need to be reattached.

When you "muscled it into neural" you broke the shifter. Most likely it will take a replacement shifter to repair.

Could be the brake switch or the shift lock solenoid.
You may be able to get it out of park when the key is between lock and on.

if the shifter is on the column remove plastic cover there is a small metal bar that moves it needs some grease or wd 40 on it

Usually a problem with the brake switch or the solenoid that locks the shifter in park.
You may be able to unlock the key switch without turning the switch on, then take the shifter out of park.

Usually this means the transmission is out of fluid. Check the fluid level, if its low add some fluid and see what that does. That's a good place to start.

Sounds like you need a new shift cable. That go from shifter down to transmission.

Take it back to the JACKASSES that fixed it, and tell THEM to FIX it!

water intrusion in the junction block is kina what it sounds like to me.
they were doing a recall on this vehicle.
there was corrosion happening to the wires.

I had the same problem and once I wiggled the shifter enough to get it out of park then the key stuck in the ignition started.