SOURCE: obd codes for a 1994 cadillac seville sls
what that means is that the ecm(main computer) is not getting a voltage signal value from the o2 sensor. this could be due to a broken wire,bad plug or a bad sensor please rate this thanks
SOURCE: Message center says traction disabled
press and hold the off and temp warmer button on ac controller until it reads out trouble codes on the display, that should get you started.
SOURCE: 1997 Cadillac Seville SLS
That is a broken or rusted fuel line. It only leaks when the fuel pump is running.
SOURCE: need help with codes from service engine light
this code is evap purge problem most likely caused by a bad evap purge sol. or blocked pure hose or faulty evap purge canister
SOURCE: abs light/traction control light
You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.
178 views
Usually answered in minutes!
×