Question about 2001 Buick LeSabre

1 Answer

2001 Buick LeSabre. How to remove headlight assembly... Just need to remove and replace the headlight assembly on my 2001 LeSabre Custom. I think it's just a matter of removing a couple of bolts, but would like to make sure before I start.. Thanks

Posted by on

  • 1 more comment 
  • Anonymous Mar 15, 2014

    2001 Buick lesabre headlights won't come on

  • Anonymous Mar 15, 2014

    My passenger side headlight won't come on 2001 Buick lesabre

  • Anonymous Mar 15, 2014

    My headlights won't come on in my 2001 Buick lesabre

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 9 Answers

The bolts you are looking to remove are located on the top of the light housing. It only takes 2 of them to remove the housing. One is about 6 to 8 inches long, and the other one is much shorter than that. Just unscrew and remove them, and pull the housing straight out.

Posted on Aug 31, 2009

Testimonial: "Thanks a bunch!"

  • 1 more comment 
  • Whatsit4 Feb 04, 2011

    If it doesn't pop-out easily, check underneath the assembly, below the highbeam. The bumper fascia can get caught on the assemble as it slides out. I used a cedar shim to push down on the fascia and it came right out. A putty knife would have also worked to separate the two.

  • brian luceri Jun 24, 2013

    what size socket wrench is needed

  • Dave Lehmer Jun 24, 2013

    I don't remember, I've since sold that car. Sorry.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car will do nothing. as if the battery wasnt hooked up. has new battery. no lights. NOTHING


2001 Buick Lesabre: Car Will Not Start Does Nothing Took ...

www.2carpros.com/questions/buick-lesabre-2001-buick-lesabre
Apr 22, 2007 - Car will not start does nothing took battery out to get tested because it would not jump start battery found to be good put battery back in ...

how to fix a buick century that wont crank - YouTube

? 2:44
https://www.youtube.com/watch?v=UWfvEouMMtc
Dec 18, 2009 - Uploaded by jay eltatertoto
how to fix a buick century that wont crank. jay eltatertoto ... How to easily fix a Buick that will not crank and security light flashing - Duration: 6:06. ... My Car Wont Turn Over - How To Test The Starter / NSS / Ignition Switch - Duration: 5:21. ... 2001 BuickCentury Custom - Duration: 19:44. uxwbill 19,621 views.

Car Won't Start Because of Anti-Theft System That Uses ...

repairpal.com > Problems > Buick > LeSabre

Feb 05, 2016 | 2001 Buick LeSabre

1 Answer

Can you adjust headlights on a 2001 Buick Lesabre Custom


Yes of course you can seems like it adjust from under the hood .

Mar 10, 2015 | Buick Cars & Trucks

1 Answer

I need to replace my water pump on my 2001 Buick Lesabre Custom 3.8 V6., while trying to remove the bolts to the pulley I noticed two of them were incorrectly installed and will not come out. How can I...


Im not sure if you have the room to remove the whole assembly..Are the heads of the bolts rounded off.. If so craftsman has a kit that will grab on the heads of the bolts..It will either take them out or break them off ..That way all you have to buy is new bolts to put the pulley back on when you install the waterpump

Sep 05, 2011 | 2001 Buick LeSabre

1 Answer

Changing passenger side low beam headlight bulb for 2001 Buick LeSabre Custom


there is very little room to gain access to the bulb from behind the headlight assembly.if you remove the plug for the headlight and then slide your hands down on either side of the bulb.there is a lock ring that you must remove(unlock)first.then pull the bulb out and install the new bulb and reassemble in reverse order.NOTE don`t touch the bulb glass with your hands or it can burn out prematurely from the oil on your skin.

Mar 15, 2011 | 2002 Buick LeSabre

1 Answer

How do i replace a starter in 2001 lesabre


the starter is located in the front of the engine, two bolts hold it in, jack the car off the ground use jack stands! to access it, disconnect the battery before u start the work!, then remove the wiring from the starter solenoid, 4 wires i think, make a note of where they go for re-assembly, remove the two bolts and drop the starter out, very easy.

Feb 26, 2010 | 2001 Buick LeSabre

1 Answer

2001Buick LeSabre parking light


On top of the headlight housing are two large knurled black plastic knobs.Unscrew them counter-clockwise.Now the whole headlight housing may be removed. Set it on the bumper and you'll have easy access to the marker light.

Nov 12, 2009 | 2001 Buick LeSabre

3 Answers

How do i change the lightbulb in the headlight?


To change the low beam headlight on the 2001 Lesabre, the headlight assembly must first be removed from the car. It is really quite simple to do. There are two bolts on the top of the assembly that must be removed - that is all! The entire assembly comes out and gives easy access to the low beam bulb. Give it a 1/4 counterclockwise turn to remove it. Plus in the new one (#9006) and reverse the procedure.

Oct 30, 2009 | 2004 Buick LeSabre

1 Answer

I have a problem with the headlight and parking light switches sticking. How is the switch assembly removed?


this happens if they never get used, most people leave them on AUTO all the time. the panel should gently pry off, its just a few metal clips. you may try cleaning it, but most likely will need to be replaced

Oct 16, 2009 | 2001 Buick LeSabre

1 Answer

Remove driver side headlight assy to replace side marker light


There are two screws holding the headlight in. The screws are just above the headlight. After removing the screws you'll need to carefully pull straight out on the headlight assembly. There's a ball/socket type joint just behind the headlight. This joint needs separated for the assembly to come all the way ouit. Reaching and replacing the side light bulb requires a bit of arm twisting.
Reverse the order to re-install the headlight.

Sep 26, 2009 | 2002 Buick LeSabre

1 Answer

1988 buick century headlights


To change the low beam headlight on the 2001 Lesabre, the headlight assembly must first be removed from the car. It is really quite simple to do. There are two bolts on the top of the assembly that must be removed - that is all! The entire assembly comes out and gives easy access to the low beam bulb. Give it a 1/4 counterclockwise turn to remove it. Plus in the new one (#9006) and reverse the procedure.

Jun 19, 2009 | 1988 Buick Century

Not finding what you are looking for?
2001 Buick LeSabre Logo

Related Topics:

1,183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...