Question about 1999 Ford Expedition

1 Answer

Ok i have a 1999 ford ex and i got a new battry for it and look at some fuse but now the 4x4 light is on on my dashbord and when i swick it two 4w it drive bad and truns left real slow some on help

Posted by on

  • yadayada
    yadayada May 11, 2010

    do u mean a new battery????

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

If the 4wd light is not flashing, then it is likely it stuck in 4wd (possbily on accident?). The slow turning and bad driving indicates that it may be in 4wd Low. They only way to take it out of 4wd Low is to put the truck in nuetral and with your foot on the brake, switch the dial (or floor lever) to 2wd. The light should go out almost immediately. Then put the shifter in drive from nuetral and drive at least 15 feet forward. That will disengage the front hubs and you should be all set.

Hope this helps.

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 dont work


you have 4w low.. low/lock..4w high and hi lock..4w low is just a slower set of gears that gives the truck way more power for like pulling or towing in harse conditions.. 4 w hi is more for traction at hyway speeds..you may have a seperate lock lever.. most do..

Jan 03, 2014 | Cars & Trucks

1 Answer

My 1999 ford ranger 3.0 flex fuel my 4x4 dont work the 4x4 hi and lo lights blink 6 times every 2 mins and i have a new shift motor on the truck idk why it wont go into 4x4 dosent ven make a noise please...


Okay, there are a few reasons that this could happen, one being the selector motor which you have replaced so lets go to the next thing which is the fuse, when the motor goes bad it will blow fuse sometimes so check all fuses even under the hood fuse box, i think its a 20 amp fuse but test all of them.

The next problem could be a bad ground, run a new ground wire from the front diff to the frame of the truck.

try these tests and let me know the out come then we can move on, good day, also there is a lot of info on this problem on the web, type in 1999 ranger blinking 4x4 lights, good day

Oct 14, 2012 | 1999 Ford Ranger SuperCab

2 Answers

What is a tbc fault on a 2006 ford f350 6.0


That is your trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code.

Feb 02, 2010 | 2006 Ford F 350 Super Duty

1 Answer

96 f150 4x4 5.0L 4wd is not engaging


is it push button if it is make sure the relays are working if they are working make sure you are getting power to the servos in the transfer case

Nov 23, 2009 | 1996 Ford F150 Regular Cab

1 Answer

How do i trun off 4x4 in dashbord


your vehicle should have a 4x4 rotating nob in the vehicle


HOPE THAT HELPS HAPPY 24TH

Jul 19, 2009 | 1999 Ford Expedition

1 Answer

1989 mitsubishi parking (TAIL) LIGHTS not working(running lights)


i would start by looking at the new dashboard switch or there could be a relay under the bonnet hope this helps regards Jim

Mar 28, 2009 | 1989 Mitsubishi Mighty Max Macrocab

2 Answers

!989 Wrangler 4x4 Problem


The only switch for the 4wd light is on the transfer case.

Feb 15, 2009 | 1989 Jeep Wrangler

1 Answer

Malfunction indicator light continue lighted


i take out one cable from the battry for several mint after that i retern the cable it solve my proublm thank for your halping




your fiathful

dedar

Nov 21, 2008 | 2007 Kia Sorento 4x4

1 Answer

4W will not turn on ford ranger 1999 4x4


that clicking sound you no longer hear is a relay switch behind dashboard ....aftermarket one's sold at all chain auto parts stores

Nov 21, 2008 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
1999 Ford Expedition Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...