Question about 2000 Buick LeSabre

1 Answer

I have a 2001 Buick Lesabre was running perfect then stoped pulling no gears worked at all is it the pressure sol or more??

Posted by on

  • chad ballard May 11, 2010

    does it still run if though no gears or explain more of the problem

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 148 Answers

Sounds like tre tranny just whent out the best way to tell is if you pull the tranny pan off and see if there is metal in it from bearings or dirt from the clutch

Posted on Jul 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missing terribly but runs. When put in gear it shuts off. What's wrong?


Buick LeSabre Questions - Running without a Mass Air Flow ...

www.cargurus.com > Questions > Buick > LeSabre
CarGurusJun 11, 2013 - It drives perfect then all of a sudden while im driving it stallsoccasionally. ... it idles ruff an stalls until it warms up does the same in gear its throwing engine ... If you are installing a idle air control valve in a 1990 Buick Centuryyou ... I put in my 3rd MAF sensor in 2 weeks and now the car is no longer stalling.

Sep 29, 2015 | 1990 Buick LeSabre

1 Answer

I had my blower motor replaced in a 2001 buick lesabre and now my air conditioner does not work?


check the pressure sensor on the a/c tank - is maybe unpluged or broken

Apr 20, 2014 | 2001 Buick LeSabre

1 Answer

My 2001 buick lesabre is pulling a random misfire code and spits and sputters and smells like the car is floading


find the fuel pressure regulator. you should see it mounted on the return line of the fuel rail under the plastic engine cover. it will have a small vacuum hose attached to it. Remove the hose and see if gas comes out of the regulator. If it does replace it immediately.

Apr 08, 2013 | 2001 Buick LeSabre

1 Answer

2001 Buick Lesabre lifters noisy


Have you tried flushing the engine crank case? You may have sludge clogging the valve lifter oil pressure ports. Get a can of Berrymans brand Chemtool, add it to a cold engine crankcase oil and run it for 5 miles or so, then change the oil and see if the noise level improves. Some tapping noise on cold start is normal and not a sign of any problem. If the noise goes away in my opinion I'd just do the flush of the system and then leave it alone.

Mar 13, 2012 | Buick LeSabre Cars & Trucks

1 Answer

2000 lesabre is hasitent when stoped at the light and the check engine light came on


check the compoter for codes and have a look at the data displayed this may help in showing what direction you need to look.check fuel pressure with a pressure gage.this a starting point to help finding the problem.it could be a bad tps problem or igntition component.what is the shape of the tune-up parts and how long has it been.

Feb 28, 2012 | 2000 Buick LeSabre

1 Answer

2005 buick rough shift 1st 2nd


The pressure switch in the transmission needs to be replaced. It is under the side cover. Common problem, see a gm dealer. Transmission is ok just get the pressure sol.switch repalced.

Oct 06, 2009 | 1991 Buick LeSabre

1 Answer

2001 buick lesabre, transmission problem?


There is a pressure sol. in the transmission that is bad . This is a common problem that requires removal of the side transmission cover. The transmission does not need to be rebuilt! Talk to a gm dealer. I have sold over a hundred of these pressure sol. and the side cover gaskets to a real gm transmission mechanic that have fixed this problem. GM parts over 20 years.

Apr 06, 2009 | 2000 Buick LeSabre

1 Answer

2001 Buick Lesabre


Im not really sure... I have a 94 buick i would say just add some air and if this doesnt work then either remove the battery or.... Have the sensors checked

Aug 25, 2008 | 1994 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...