Cars & Trucks Logo

Related Topics:

BAC BAC Posted on Oct 11, 2016

The plug on the back of the ignition of my nc ford fairlane has 6 wires I need to know what the power ones are and what ones I touch together to start my car I have the key and immobilizer

5 Related Answers

Anonymous

  • 187 Answers
  • Posted on May 10, 2009

SOURCE: I need the key to start engine or by-pass the immobilizer.

There is a chip in the key on the newer cars. The dealer should be able to send your information to Hyundai and order a new key. Pricey. Check with another dealer.

Ad
ahmed_mmm

ahmed

  • 72 Answers
  • Posted on Sep 16, 2009

SOURCE: 2005 Mazda 6 Immobilizer System

try the spare key if the problem still persist .
then you have to diagnose the immo system by scan tool to know which DTC is recorded

Anonymous

  • 288 Answers
  • Posted on Jan 23, 2010

SOURCE: Ford NC 1993. 1 time in 5 ish I have to release

replace the engine ground from the battery to engine and to the body sounds like bad grounds . seen this before fords are sensitive to grounds .hope this helps Thunderboltz please rate if this helps.

Anonymous

  • 22 Answers
  • Posted on Mar 20, 2011

SOURCE: 2004 cadilac cts car wont

sounds like the main brain or it could possibly be a fuse or a relay something shorted out.

bowtie35278024

Dan Hooper

  • 4523 Answers
  • Posted on Feb 27, 2016

SOURCE: My immobilizer locked up on my 03 maxima is there anyway wiring the ignition/ immobilized wire together to bypass nats if no what about fuel pump

You can not just wire the wires together and have it work, there needs to be a certain amount of resistance in the circuit for it to work. And it isn't the fuel pump that gets immobilized, it's the fuel injectors that will not meter.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where do I find fuel pump in a NC ford fairlane please

Would you mind posting a detailed question like what year the car is and engine size what does NC mean? If this is a old Fairlane it's bolted to the timing cover on the left side but if your in a different country then the U.S.A. THERE ARE DIFFERENT MODELS AND YEARS OF THE VEHICLE PLEASE SPECIFY WHAT YOU HAVE AND WHERE YOU ARE OK IT'S IMPORTANT TO HELP YOU SOLVE YOUR QUESTION
0helpful
1answer

1995 f 150 5.0 no power when you accelerate,sitting at idle running rough erratic idle shaking

I don't know what testing you've done? How long since a tune-up? Any applicable trouble codes?
Have you checked for a spark misfire? Sometimes you can use a digital multimeter, engine idling, touch spark plug wires, one at a time, notice the readings. This is an inductive reading, you don't take the spark plug wire loose and you don't penetrate the wire insulation, you just touch it. I've seen readings of .6 or .7 volts, not even a full volt. If you get reading bouncing off zero, that's where you start checking. With distributor ignition ignition, the spark plugs-- wires--cap and rotor are tune-up parts. I know some fords have had trouble with tfi modules.
Just to add, the basics for almost any vehicle with a rough idle, check for a leak of some kind, fuel--egr--vacuum, something of that nature.
0helpful
1answer

1994 ford fairlane nc. dash lights, brake lights, indicators all stopped working. 1 row of fuses have no power. car wont start but turns over.

I assuming that you mean the power distribution box under the hood unbolt the box from the fender disconnect the battery cables now try to turn the box over and take off the bottom cover and look for a break in the metal strip or corrosion on the side you have tested but is dead there should be something wrong there and this is where the power comes in and is distributed thus its name
1helpful
1answer

What wires do I join in my nc ford fairlane on the back of the ignition plug to start it I have the key and immobilizer but the ignition is broken

normally on some fords theres a round plug which clips onto the ignition barrel itself if you pull the plug off you should be able to put a flat screwdriver in center of the ignition plug and turn it like a key hope this helps im not familar with your model
0helpful
1answer

Wanted 1993 ford fairlane nc wiring diagram

not sure where you are in australia,but call me tomorrow on 0424 362 358 and i'll fax it to you
1helpful
1answer

Disable immobiliser ona Ford NC Fairlane

to disable it is easy depends on where it is..

to locate it contact your local dealer they should tell you the exact location of it, once its external and not built into the CPU..

once you have the location *usually under the dashboard), simply unplug the wires connecting to it..

that's it.
1helpful
1answer

Ford NC Fairlane Fuel pump

Nc fairlane v8 fuel relay is under the header tank green is fuel pump relay and brown is for ecu
1helpful
2answers

2000 ford mustang code 453 and missfire cyl 5 where is the cyl

a haynes manual from a parts place will show you--or chec the condition of each plug wire-if one looks bad or falls apart--probly need to get all new wires /plugs
0helpful
2answers

Ford NC 1993. 1 time in 5 ish I have to release

More likely to be the Neutral safety stitch out of adjustment.

Moving the E-Brake only slightly moves the Shifter handle at the same time.

Try moving to Neutral then starting the vehicle.

Hope this tip helps.

r/
David
0helpful
1answer
Not finding what you are looking for?

68 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...