If that's the only light not working, the bulb probably needs to be replaced. To get the lamp housing out so you can change the bulb, open the trunk and pull back the liner on the left rear side - there are usually a couple of plastic fasteners that need to be removed to pull back the liner. You should now be able to see two or three fasteners (plastic or metal) that hold the lamp assembly to the body. Remove these and pull the lamp assembly out to the rear. Remove the bulb holders from the lamp assembly by twisting them a quarter turn counter clockwise, then remove and replace the non-functioning bulb. Reverse to reassemble.
53 views
Usually answered in minutes!
×