Question about 1999 Lexus ES 300

1 Answer

When changing my alternator i broke the screw that adjust the alternator the screw broke in the lil block i tried to get it from a junk yard i couldnt find it do u know where i could get it online or a part #

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 36 Answers

First, you will need to get the broken off screw piece out of the hole you want to sink a replacement screw into. You should be able to use an easy-out tool for this, careful not to ruin the female threads. Then go to your local hardware store, preferably with the alternator, and get the screw that you need.

Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Charging system


If the used alternator quit working then it\'s broke! Make sure your battery is not shorted internally as this could make an alternator work much harder than it needs to. Try getting the alternator repaired at a shop. Buying electrical parts at a junk yard is always a crap shoot...Chris

Jun 26, 2013 | 1991 Mercury Capri

1 Answer

How do you open the glove compartment on a 95 dodge stealth base when the lock is missing or broke


UNSCREW BOTTOM SCREWS TO RELEASE BOX THEN USE SCREWDRIVER AT LATCH ASSY.REPLACE LATCH ASSY,JUNK YARD OR DEALER

Sep 08, 2012 | 1995 Dodge Stealth

1 Answer

Changing front rotors


Capri rotor replacement is only done by a mechanically inclined person with tools. The rotors have the front bearings pressed in, so the rotor must be removed from the axle. Bearings must be pressed in, and preload must be adjusted for the new rotor. If you do not understand any of this then find a mechanic. Expect to pay at least $150 per rotor replacement.

An alternative is if you can find a junk yard Capri with decent rotors, then it can be installed onto your vehicle without the need for a mechanic to do bearing replacement. Keep in mind though that the junk yard Capri may have bad bearings...Good luck...Chris

Sep 11, 2011 | 1991 Mercury Capri

1 Answer

I just put the alternator belt on my 02 Lancer and was smart enough to get the tightening sequence wrong and broke the long tensioner bolt... I was lucky to get it tight first but how do I find that bolt.


To work on the alternator belt first, take off the negative battery cable so you do not blow an expensive fuse on the positive battery cable clamp or a block fuse under the hood . Facing the back of the car , reach UNDER the alternator and loosen the bolt on the bottom right side, now loosen the bolt on the adjuster block on top, you can now turn the adjuster bolt and move the alternator to change the belt. Mitsubishi has used the same bolt on almost every alternator since day one. It should be available at any salvage yard with a Mitsubishi car from 1979 on and is probably in stock at any Mitsubishi dealer for just a couple of dollars.

Apr 13, 2011 | 2002 Mitsubishi Lancer

1 Answer

The shifter linkage broke at the tran , its the lil plastic ball joint that broke , do i have to change the hole cable/rod r is there a way to change the plastic ball piece ??????


Call your exPontiac dealer Buicks share a lot of parts with Pontiac, call the parts department an see if they have a fix, I imagine you'll have to buy a whole new cable. You can try a bone yard but you'll end up with the same thing eventually.

Oct 14, 2010 | 2003 Pontiac Sunfire

3 Answers

Hyundai Sonata 2006 passenger side sun visor.


My driver side sun visor was broke too wouldn't stay up, You can buy new from dealer, or at a junk yard, all you do is pull visor down and unplug connection, plug new one in.

Apr 22, 2010 | 2006 Hyundai Sonata

1 Answer

How to replace the window on a nissan quest


go to junk yard. use a flathead screw driver and pop the plastic a loose on the inside of window. its has two screws on each side that comes off easily with a ratchet. i forgot what size

Mar 13, 2010 | 1997 Nissan Quest

Not finding what you are looking for?
1999 Lexus ES 300 Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...