At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Evaporative Emission Canister Purge Solenoid Valve Replacement
Removal Procedure
Remove the air cleaner assembly from the studs and reposition to the side.
Disconnect the evaporative emission (EVAP) canister purge valve electrical connector (1).
Disconnect the EVAP canister purge valve tube from the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service.
Disconnect the chassis EVAP vapor line from the EVAP canister purge valve. Refer to Plastic Collar Quick Connect Fitting Service.
Remove the EVAP canister purge valve bracket bolt.
Remove the EVAP canister purge valve with bracket.
Remove the EVAP canister purge valve from the bracket.
Inspect for carbon release in the EVAP canister purge valve ports. If there is any loose carbon, replace the EVAP canister and any components necessary to remove the carbon particles.
Installation Procedure
Install the EVAP canister purge valve to the bracket.
Position the EVAP canister purge valve with bracket to the cylinder head.
Caution: Refer to Fastener Caution.
Install the EVAP canister purge valve bracket bolt.
Tighten:
Tighten the bolt to 18 [n-m] (13 lb ft).
Connect the EVAP canister purge valve tube to the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service.
Connect the chassis EVAP vapor line to the EVAP canister purge valve. Refer to Plastic Collar Quick Connect Fitting Service.
Connect the EVAP canister purge valve electrical connector (1).
Position the air cleaner assembly and install onto the studs.
First let me tell you that the canister purge valve is covered under warranty for 5years 60,000 miles ! Anyway it is located to the rear of the cylinder head above the block/trans mounting area
? 2:17
https://www.youtube.com/watch?v=jIKaPF2Yw3I
Mar 20, 2007 - Uploaded by richpin06a
Saturn EVAP Solenoid Location. ... How To Test and Replace EVAP Canister Vent Control Valve P0446 - Duration: 6:18. by CarsNToys ...
The canister purge valve is on the intake manifold . The vent valve is under the vehicle near the fuel tank .
The vent valves opens and sends exess gas fumes to the purge valve witch in turn opens when the engine is running faster and can burn this excess fuel Its all about emissitions
There is a canister purge valve & a volume control purge valve on your truck. The canister purge valve is on the evap. canister itself(at the rear of veh. near the fuel tank. The volume control purge valve is located in the eng. compartment, passenger side behind Battery. You didn't mention if it's a 4 or 6 cyl.
The EVAP service port is located in the EVAP purge pipe between the EVAP
purge solenoid and the EVAP canister. The service port is identified by
a green colored cap.
Fig. Showing location of (1) Evaporative Emissions (EVAP) Canister
Purge Solenoid and (2) Exhaust Gas Recirculation (EGR) Valve
Fig. EVAP Purge valve solenoid (3) mounting bolt (2) and insulator
(1) on 2000-2005 4.8L, 5.3L, 6.0L Engines
×