Question about 2004 Mazda 3

1 Answer

I have a 2003 Mazda 6 which is locked up, we tried removing neg. connector on battery and holding brake for 10 seconds, worked the first time a month ago, but not this time any suggestions? believe it is the immobilizer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 36 Answers

Answer
Have a look at the transmod bypass box at
www.relayhelp.com or at www.passlock2.com

This houses the ignition key, and through a pulse,
allows the remote start to happen.

See if this is what you are talking about.

Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Malibu not turning over.


You never remove the + battery cable , unless you remove the negative first .
it is actually neg that u want to remove when u work on your car, when you remove the neg cable the whole car cannot make a connection or short, there are parts of the car that hold juice, once you remove the negative cable there is no path for current to travel.
look at it this way, most all metal in the car is the ground and pull the ground cable at the battery and there is no circuit.

there are older cars that were positive chassis, complete opposite, but thru electrolysiss the metal quickly deteriorated.

trust me remove the negative cable, not the positive.

the best thing people could do is make a quick disconnect for the neg. terminal for service.

Your best bet , take your vehicle to a qualified ASE certified repair shop . Would not want you to hurt youself , batteries can explode with sparking when hooking up a battery .

Mar 09, 2017 | 2006 Chevrolet Malibu

1 Answer

Mazda 6 2005 driver door jammed


if you talking about door latch wont let door close.try to reset all door locks.first if you cant get door close.work unlock button with remote or door switch.then hold open door handle while you flat screw driver pull up latch in door latch should stay up so door will close.once get door close.try resetting all door locks by sitting inside vechicle with all doors close.remove key from ignition.open drivers door.wait 24 seconds.turn ignition switch on and back to lock position 3 times.press and release drivers door courtesy light 3 times.ensure doors lock and unlock.if not wait 40 seconds and repeat procedure.if this procedure fails. you have problem in the door latch and lock mechanism inside the door itself.

Jan 04, 2013 | 2004 Mazda 6 Sport

2 Answers

Mazda 6 2003. Battery Light. I have been getting Battery light on my Mazda 6. After 10 minutes of driving i will get all lights on Air Bag, Handbrake, Dimmers, engine light..possibly all light on the...


Hi, unfortunately your voltage regulator is controlled by the PCM. If the 120 amp charge fuse is good and the alternator is good; then the PCM is probably bad, as your mechanic is suggesting.

jturcotte_1922.gif

Jul 09, 2011 | 2003 Mazda Mazda6

1 Answer

Whats wrong with my car remotes? 2003 mazda 6


sounds like keyless entry module failure or PJB box failure wiring check required

Oct 20, 2009 | 2003 Mazda Mazda6

1 Answer

How do I install a brake booster on a 2003 Ford Expedition Eddie Bauer with no ESC package? Do I need to bleed anything before removing the part?


disconnect the neg batt cable,loosen clamp and disconnect air cleaner outlet tube and resonator from the air cleaner. 2.disconnect maf sensor connector. 3.lift air cleaner assy from tray and position aside. 4. remove screws from power steering resevoir, and position aside. 5.disconnect brake fluid level sensor, and if equiped brake pressure switch. 6.remove the two mounting nuts holding master cylinder, position master cylinder aside (DO NOT LOOSEN LINES ON MASTER CYL). 7.remove mounting bolts for degas bottle and postion aside. 8.if equiped diconnect wiring at the pedal position sensor. 9.relaease clamp and disconnect hose. 10.remove the pin, washer, bushing and switch, disconnect pushrod. 11.remove the nuts and brake booster, to access nuts fold back sound insulation. reverse procedure to install.

Sep 16, 2009 | 2003 Ford Expedition

1 Answer

Changed battery in key now it doesnt work 2004 mini built in 11/03


1.) Close all doors

2.) Switch the ignition switch to KL-R (first turn), switch back off within 5 seconds and remove the key

3.) Within 30 seconds, press and hold the unlock button and at the same time, press and release the lock button (3) times. (Must be completed within 10 seconds)

4.) Release both buttons. The doors will lock/unlock to signal a successful initialization.

5.) If additional keys need to be initialized, repeat steps 3-4 within 30 seconds

6.) Switching the ignition to KL-R completes the initialization

May 17, 2009 | 2003 Mini Cooper

2 Answers

Mazda 6 '06 won't start


Well you are right, it does sound like it's just the battery. Since you can't get the car to stay running, take your battery to your local parts store and they will test the battery for free.
If it started like that but shut off right away it's probably cause the cells in the battery just can't hold the energy anymore.
If the battery tests bad get the new one and put it in, after that go back to the parts store and have them test your entire charging system, most parts stores do that free as well.

Dec 19, 2008 | 2003 Mazda Mazda6

3 Answers

Keyless remote does not work after replacing batteries


I had the same problem and located the addendum to the owners manual. It's kind of overcomplicated it seems. Here is what it says:
1) Confirm all doors are closed and the key is out of the ignition.
2) Open the driver's door and put the key in the ignition within 10 seconds.
3) Remove the key within 10 seconds.
4) Push and release the driver's door switch 3 times within 20 seconds.
5) Insert the ingition key within 10 seconds.
6) remove the ignition key within 10 seconds
7) press and hold both "lock" and "unlock" on the transmitter for more than 5 seconds within 20 seconds of removing the key All doors will lock/unlock to confirm the process has been properly done.
8) Press "lock" or "unlock" on the transmitter within 5 seconds of completing step 7. All the doors will lock/unlock to confirm that the process was properly done.
At this point the transmitter has been properly programmed.

Of course, this didn't help me. My transmitter still does not work. I did confirm the procedure with a known good transmitter, so it is valid. If the lock/unlock does not happen in step 7, you more than likely have a bad transmitter.

Oct 12, 2008 | 2003 Suzuki Aerio

4 Answers

Honda radio codes


turn the radio off push preset buttons 1 &6 while holding these buttons turn on the radio the serial# will come up call the dealer with this # they should give you the radio code if you have a problem write back i can get it for you if you have error on the radio then disconnect the battery cable neg for aprx. 30 seconds reconnect the enter the code using your preset buttons

Aug 01, 2008 | 2007 Honda CR-V

1 Answer

Programming keyless remote


2003-04 Mazda 6 REMOTE PROGRAMMING


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!

Good Luck.

Jul 12, 2008 | 2003 Mazda Mazda6

Not finding what you are looking for?
2004 Mazda 3 Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...