Question about 2000 Chevrolet Impala

2 Answers

Water is seaping out betwean the intake and head do you think it could just be an intake gasket its leaking toward the throttle body

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

If its leaking next to throttle body shift cable side where intake is. its the intake gasket leaking.if its leaking under the throttle body.check top radiator hose.it could be leaking also.

Posted on Jul 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Could be head or intake

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Water leaks between engine and transmission how can fix it 2001 buick regal supercharge


Replace the transmission gasket and rear engine seal. Might check out turbo gaskets too.

Feb 23, 2017 | Buick Cars & Trucks

1 Answer

I changed my water pump on my 97 camaro RS after i discovered a bad leak while flushing my radiator. i changed the thermostat as well. the leak is not coming from the pump. It seems to beabove the water...


May be coming from the intake gaskets. Coolant does pass through the heads into the intake manifold.
There should also be coolant passages in the bottom of the Throttle Body. You would see a couple of 3/4 and/or 5/8 hoses and maybe a tube goiung into the Throttle Body. This is so warm water passes through the TB so it does not freeze up.

Sep 22, 2011 | 1997 Chevrolet Camaro

2 Answers

2001 daewoo leganza water is entering to the oil could the throttle body gasket need replaced?


No has no way to internally get water into engine. Most likely head gasket, in some cars the intake gasket could leak coolant into the crankcase.

Jan 29, 2011 | Daewoo Leganza Cars & Trucks

3 Answers

How do I remove the head? (Blown Head gasket)


prev.gif next.gif Cylinder Head REMOVAL & INSTALLATION 2.3L Engine
  1. Properly relieve the fuel system pressure.
  2. Disconnect the negative battery cable, then drain cooling system into a suitable container.
  3. Detach the heater inlet and throttle body heater hoses from water outlet. If accessible at this time, disconnect the upper radiator hose from the water outlet.
  4. Remove the exhaust manifold. For details, please refer to the procedure located in this section.
  5. Remove the intake (camshaft housing for SOHC) and exhaust (DOHC only) camshaft housings.
  6. Unfasten the oil fill tube bolt/screw then remove the oil fill cap and level indicator assembly. Pull the oil fill tube upward to unseat from block.
  7. Label and disengage the injector harness electrical connector.
  8. Detach the throttle body-to-air intake duct.
  9. Tag and disconnect the power brake vacuum hose from the throttle body.
  10. Remove the throttle cable bracket.
  11. Remove the throttle body from the intake manifold with the electrical harness and throttle cable attached and position the assembly aside.
  12. Tag and disconnect the MAP sensor vacuum hose from the intake manifold, then remove the intake manifold brace.
  13. Detach the electrical connectors from the MAP sensor, IAT sensor and the EVAP canister purge solenoid.
  14. If not already done, detach the upper (inlet) radiator hose from the water outlet.
  15. Disengage the coolant temperature sensor connector(s).
  16. Unfasten the cylinder head bolts in reverse order of the installation sequence shown in the accompanying figures.
  17. Lift the cylinder head from the engine block. Remove and discard the gasket. Inspect the oil flow check valve for freedom of movement.
  18. Using a suitable solvent, thoroughly clean and dry all bolts, bolt holes and mating surfaces. Inspect the head bolts for any damage and replace, if necessary. If using a scraper to clean the old gasket material from the mating surfaces, use only a plastic or wood one, NOT a metal scraper. Do NOT allow any debris to fall into the engine! To install:
  19. Place a new cylinder head gasket on the cylinder block, then carefully position the cylinder head in place.
  20. Sparingly coat the head bolt threads with clean engine oil, then allow the oil to drain off before installing.
  21. On 1988-89 engines, install and tighten the cylinder head bolts, in sequence, as follows:
    • Step 1 - Tighten all head bolts in sequence to 26 ft. lbs. (35 Nm)
    • Step 2 - Using a torque angle meter, tighten the short bolts an additional 80°and the long bolts an additional 90°in sequence Fig. 5: Cylinder head bolt tightening sequence - 1988-89 2.3L engine 86883121.gif
  22. On 1990-91 engines, tighten the cylinder head bolts, in sequence, as follows:
    • Step 1 - Tighten all head bolts in sequence to 26 ft. lbs. (35 Nm)
    • Step 2 - Using a torque angle meter, tighten the short bolts an additional 100°and the long bolts an additional 110°in sequence Fig. 6: Cylinder head bolt tightening sequence - 1990-91 2.3L engine 86883122.gif
  23. On 1992 engines, tighten the cylinder head bolts, in sequence, as follows:
    • Step 1 - Tighten, in sequence, head bolts 1-6 to 26 ft. lbs. (35 Nm), 7-8 to 15 ft. lbs. (20 Nm) and 9-10 to 22 ft. lbs. (30 Nm).
    • Step 2 - Tighten all head bolts, in sequence, an additional 90°using J 36660 or equivalent
    • Step 3 - In sequence, loosen each bolt one turn, then immediately re-tighten to the specified torque
    • Step 4 - After completing step 3 on all 10 bolts, tighten each bolt, in sequence, an additional 90° Fig. 7: Cylinder head bolt tightening sequence - 1992 2.3L engine 86883123.gif
  24. On 1993-95 vehicles, tighten the cylinder head bolts to the specifications shown in the accompanying figures. Fig. 8: Cylinder head bolt tightening sequence and specifications - 1993 2.3L engine 86883124.gif
    Fig. 9: Cylinder head bolt tightening sequence and specifications - 1994-95 2.3L engine 86883125.gif
  25. Engage the coolant temperature sensor electrical connector(s).
  26. Connect the upper radiator hose to the water outlet.
  27. Install the intake manifold bracket.
  28. Attach the following electrical connections: MAP sensor, IAT sensor, and the purge solenoid.
  29. Using a new gasket, install the throttle body to the intake manifold.
  30. Install the accelerator control cable bracket.
  31. Connect the throttle body-to-air intake duct.
  32. Install the oil fill tube and level indicator.
  33. Install the camshaft housing(s).
  34. Install the exhaust manifold. For details, please refer to the procedure located in this section.
  35. Connect the heater inlet and throttle body heater hoses to the water outlet.
  36. Fill all fluids to their proper levels.
  37. Connect the battery cable, start the engine and check for leaks.

Sep 24, 2010 | 1992 Oldsmobile Achieva

1 Answer

2004 GMC Sierra 5.3L engine. Using excessive coolant; no external leaks. Passed compression test. Intake gaskets replaced. Residue found inside the intake and heads from burnt coolant. Suspect it may be a...


I was going to say water pump but no block the water inlet to throttle body and let run a while can you smell a sweet smell or steam comming from your tail pipe Next is a die test you can do . Put the die in your rad and go for a 5 mile ride now use a cheep black lite $3.00 at lowes the leak will show up. good luck CJ

May 12, 2010 | 2000 GMC Sierra

1 Answer

1991 Jaguar XJ6 Soverign 4.0 Water in the engine oil


Get engine warm and do a compression test. This easily eliminates head gasket. Head gasket is a biggish job and time wasted if it is not the problem. Part throttle breather unlikely as this is a vacuum applied to the cam cover, so water is unlikely to get in there as the air is coming out of the engine. But, if water is in the inlet manifold, could it be the inlet manifold to head gasket? I can't remember for sure, but I think this is water heated? If so, that is probably your culprit. If not, it sounds like a top end water leak and unlikely to be head gasket, head gasket leaks nearly always show up as steam out of the exhaust - "white smoke". Hope this helps.

Jul 27, 2009 | 1993 Jaguar XJ6

2 Answers

I have a 1999 saturn sl1 and when i start it up it revs up and after a minute it calms down, also i have a coolant leak coming from the back side of the engine and i'm not sure if it is a freeze out plug...


A coolant leak usually means a bad head gasket. About the high revving, take off the throttle body and clean it. Also, take out the idle air control and clean only the tip and clean the idle air passage with a test tube brush. Before you remove the throttle body, buy a new gasket.

Jul 24, 2009 | Saturn SL1 Cars & Trucks

2 Answers

White smoke coming out tailpipe


If your intake gaskets are leaking, when you dump soapy water on the gasket, it should bubble like crazy ( when it's running). If you can, run it with the rad cap off and watch for bubbles. If it keeps bubbling, you probably have a head gasket problem.

May 14, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
2000 Chevrolet Impala Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...